Audio-Technica AT-LP60XUSB-BK Fully Automatic (Analog/USB) Belt-Drive Turntable Black Refurb

With the AT-LP60XUSB fully automatic belt-drive turntable you can experience your vinyl's high-fidelity audio directly or convert it to digital. The AT-LP60XUSB plays both 33-1/3 and 45 RPM records and is equipped with a USB output that allows direct connection to your computer. Just download the free Mac- and PC-compatible Audacity recording software (or software of your choice) and start converting your records to digital audio files. In addition to the USB output, the turntable is also equipped with a detachable RCA output cable (3.5 mm male to dual RCA male) and a built-in switchable phono preamp so you can connect directly to your home stereo, powered speakers, computer and other components, whether they have a dedicated phono input or not. This updated version of the AT-LP60-USB features a redesigned tonearm base and headshell to improve tracking and reduce resonance. Noise is further reduced by the inclusion of an AC adapter that moves the AC/DC conversion outside of the chassis where its impact on the signal chain is limited. Product Details Experience your vinyl's high-fidelity audio directly or convert it to digital Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM Anti-resonance, die-cast aluminum platter Redesigned tonearm base and headshell for improved tracking and reduced resonance Integral Dual Magnet phono cartridge with replaceable diamond stylus (ATN3600L) AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain Built-in switchable phono pre-amplifier for phono- or line-level output Convert your vinyl records to digital audio files by downloading and using the free Mac- and PC-compatible Audacity recording software (or software of your choice) Preserve your favorite 33 1/3 and 45 rpm vinyl records as digital files with your computer and the black Audio-Technica AT-LP60XUSB Stereo Turntable. Audio Technica AT-LP60XUSB turntable also has a built-in switchable preamplifier, allowing you to connect it directly to your stereo system or speakers of choice via RCA cables. Fully manual operation with 33 1/3 and 45 rpm speeds with Anti-resonance, die-cast aluminum platter Tonearm base and headshell designed for enhanced tracking and reduced resonance with Dual Magnet phono cartridge with replaceable diamond stylus Built-in switchable preamplifier for phono- or line-level output with Convert your vinyl records to digital audio files with your recording software and AC adapter handles AC/DC conversion outside the chassis, helping to reduce noise in the signal chain Audio-Technica Consumer AT-LP60XUSB Specs Motor DC Servo Drive Method Belt Drive Speeds 33 1/3, 45 rpm Tonearm Type Straight Signal to Noise Ratio >50 dB (DIN-B) Wow and Flutter   Stylus Material: DiamondReplacement: ATN3600L Output 1 x Stereo RCA Phono / Line Pair (Switchable Preamplifier)1 x USB Output Level Phono: 2.5 mV Nominal at 1 kHz, 5 cm/secLine: 150 mV Nominal at 1 kHz, 5 cm/sec D/A Converter Not Specified by Manufacturer Gain Phono Preamp: 36 dB Nominal, RIAA Equalized Turntable Platter Die-Cast Aluminum System Requirements Windows 7 or Above or Mac OS X or AboveAvailable USB Port (USB 1.1 or Higher) Power Requirements 120 VAC, 60 Hz, 3 W Dimensions (W x H x D) 14.15 x 3.84 x 14.7" / 359.5 x 97.5 x 373.3 mm