DIG Irrigation - BO92A - 2-Dial Hose End Timer

Instruction The B092A, 3/4" Two-Dial Hose End Timer has joined DIG’s innovative and rugged line of battery operated controllers and timers, offering simplified programming and improved monitoring of battery power for reliable operation. With a higher flow rate at lower inlet pressures and a range of simple programming features, the B092A delivers a reliable and cost-effective solution for residential uses. The timer has up to four start times per day with a two minute to four hour programming duration and an operating flow range of .1 to 6.3 gallons per minute for use in a wide range of applications, including drip irrigation or micro sprinkler systems connected to a garden hose or faucet/spigot. It uses one 9-volt alkaline battery that can last for up to one year. 3/4” FHT inlet and MHT outlet Watering duration from 2 minutes to 240 minutes Eight watering intervals ranging from every six hours to once per week Low battery auto lock out to ensure the timer cannot open unless it can close Low energy use (less than 20 micro amps in standby mode) ensures long battery life Easy manual operations using a single button High water flow at normal water pressures Operates on low water flows of less than 0.5 GPM 14% of higher flow at 30 PSI High strength female hose thread connection with easy removal via spring clip Powered by one 9-volt alkaline battery with battery life up to one year Weather resistant Three year limited warranty Specifications Flow rate up to 6.3 GPM at 30 PSI (24 L/PM at 2 Bar) Temperature range: 40°F to 125° F (3° C to 50° C) Operating pressure 10 PSI to 80 PSI (0.6 – 5.5 Bar) Power source: 9-volt alkaline battery (not included) Solenoid: durable electric motor Power consumption 20 micro amps in standby mode. Materials: body ABS and inner parts of high-impact plastic Dimensions: 6” D X 4” W x 6.5” H ( 15.2 cm X 10.0 cm X 16.2 cm)