12" 150-300W RMS 4-Ohm DVC Subwoofer Kicker CompC Series / 50CWCD124
12" 150-300W RMS 4-Ohm DVC Subwoofer Kicker CompC Series / 50CWCD124 This Listing Includes: (1) 50CWCD124 12" Subwoofer Description: Experience the ultimate in bass performance with the Kicker CompC Series 12" DVC Subwoofer. Designed to deliver powerful, deep bass, this subwoofer features a dual 4-ohm voice coil configuration, allowing for versatile wiring options and enhanced power handling. With a robust RMS power range of 150-300 watts, it provides the perfect balance between intensity and clarity, making it ideal for both everyday listening and high-impact sound systems. Its durable construction ensures long-lasting performance, while its sleek design fits seamlessly into any setup. Elevate your audio experience with the Kicker CompC Series and feel every beat with precision and power. Download Owner's Manual Features: Dual Four-Ohm Voice Coil and Reengineered for Increased Excursion and Deeper Bass Injection-Molded Polypropylene Cone Forced-Air Cooling for Outstanding Durability Ribbed Polyurethane Surround Signature Yellow Surround Stitching High-Strength Spiralead Tinsel Leads Stamped Steel Basket High Temp Voice Coil Spring-Loaded Speaker Terminals Specifications: Size [in, cm]: 12, 30 Recommended Amplifier Power [watts RMS]: 150-300 Peak Power Handling [watts, per ANSI/CTA-2031-A]: 600 Sensitivity [dB 1w/1m]: 87.1 Rated Impedance [OHMS]: 4 DVC Fs [Hz]: 30.6 Frequency Response [Hz]: 27-500 Thiele & Small Parameters: Electrical Parameters Re: 7.485 | Ohm | electrical voice coil resistance at DC Krm: 0.00485 | Ohm | WRIGHT inductance mode Erm: 0.925| WRIGHT inductance mode Kxm: 0.03795 | Ohm | WRIGHT inductance mode Exm: 0.775 | WRIGHT inductance mode Cmes: 613.11 | µF | electrical capacitance representing moving mass Lces: 39.39 | mH | electrical inductance representing driver compliance Res: 63.035| Ohm | resistance due to mechanical losses fs: 32.45 | Hz | driver resonance frequency Mechanical Parameters Mms: 127.2375 | g | mechanical mass of driver diaphragm assembly including air load and voice coil Mmd(Sd): 113.4135 | g | mechanical mass of voice coil and diaphragm without air load Rms: 3.299 | kg/s | mechanical resistance of total-driver losses Cms: 0.1895 | mm/N | mechanical compliance of driver suspension Kms: 5.275 | N/mm | mechanical stiffness of driver suspension Bl: 14.406 | Tm | force factor (Bl product) Loss Parameters Qtp: 0.9025 | total Q-factor considering all losses Qms: 7.863 | mechanical Q-factor of driver in free air considering Rms only Qes: 0.934 | electrical Q-factor of driver in free air considering Re only Qts: 0.835 | total Q-factor considering Re and Rms only Other Parameters Vas: 75.7283 | I | equivalent air volume of suspension n0: 0.2645 | reference efficiency (2 pi-radiation using Re) Lm: 86.425 | dB | characteristic sound pressure level (SPL at 1m for 1W @ Re) Lnom: 86.72 | dB | nominal sensitivity (SPL at 1m for 1W @ Zn) Sd: 530.93 | cm^2 | diaphragm area Xmax: 13.275 | mm Measurements & Suggestions (Sheet) Outer Frame Dimension [in, cm]: 12-5/8, 32 Mounting Depth [in, cm]: 5-3/4, 14.6 Mounting Cutout [in, cm]: 11, 27.9 Max Rec Sealed Box Vol [cu. ft, liters: 3.5, 99.1 Min Rec Sealed Box Vol [cu. ft, liters: 1.25, 35.4 Max Rec Vented Box Vol [cu. ft, liters): 2.25, 63.7 Min Rec Vented Box Vol [cu. ft, liters]: 1.75, 49.6