STEERING GEAR GREASE CONVERSION KIT FOR 2.5 TON - SGGK41

STEERING GEAR BOX GREASE CONVERSION FOR ALL 2.5 TON TRUCKS.  IF YOUR STEERING GEAR BOX IS LEAKING FROM THE PITMAN ARM SEAL, IT IS A VERY INVOLVED JOB TO CHANGE THAT SEAL. THE JOB INVOLVES EITHER REMOVING THE INJECTION PUMP TO REMOVE THE STEERING GEAR, OR REMOVING/MOVING THE ENGINE OVER.  WITH BIG MIKE'S GREASE CONVERSION KIT, YOU REPLACE THE OIL WITH #0 GREASE. THIS GREASE IS SEMI FLUID, AND ALTHOUGH IT WILL SLOWLY FLOW AROUND IN THE GEAR BOX, IT IS MUCH LESS LIKELY TO LEAK OUT OF A BAD SEAL.  THIS IS A COMMON CONVERSION FOR MANY THINGS THAT HAVE SLOW SPEED GEARS INSIDE OF THEM. NO REMOVAL OF THE INJECTION PUMP, NO SEAL REPLACMENT, NO MOVING THE ENGINE. ABOUT A HALF HOUR OF TIME AND YOUR LEAKING PITMAN ARM SEAL WILL NO LONGER BE AN ISSUE.  THE KIT WILL INCLUDE ONE GREASE FITTING FOR THE DRAIN PLUG, AND 4 TUBES OF GREASE.  THE CONVERSION IS SIMPLE, REMOVE THE OIL DRAIN PLIG FROM THE GEAR BOX AND DRAIN THE OIL.  REMOVE THE FILL PLUG FOR THE GEAR BOX.  INSTALL THE SUPPLIED GREASE FITTING