Keychains in Faux Leather

Supplies needed:- sublimatable substrate- sublimation transfer- Teflon or scratch paper- heat tape (H107)- soft paper towel (optional)Heat press settings:- temperature - 390 degrees F- dwell time - 1:00 - 1:15 minutes- pressure - light to mediumSublimation:Layer the press from the bottom pad to the top heat platen as follows:1. Teflon sheet or scratch paper2. 2-3 layers of soft paper towel (optional)3. substrate4. transfer5. Teflon sheet or scratch paperSteps:1. Remove the ring from the substrate. It could cause a faded area.2. Position the substrate onto the transfer and adhere transfer to substrateusing heat tape.3. Place the transfer and substrate into the press (transfer on top ofsubstrate).4. Place the Teflon sheet or scratch paper over the transfer.5. Press the items using the sublimation settings listed above.6. Remove items from the press immediately. Use heat resistant gloves ifnecessary - the items will be very hot.7. Remove transfer from substrate.8. Let cool then sublimate