Ford Small Block Compatible 302 c.i. Engine and 4R70W Automatic Transmission - 365 Horsepower - Bronco Edition Builder Series with Black Pulley Kit - Fuel Injected
Description: Horsepower & Torque: 365 Horsepower / 365 ft. lbs. Torque Compression Ratio: 10.0:1 Aluminum Heads Hydraulic Roller Cam Hypereutectic Pistons Block: BluePrint Engines High Strength Cast Iron Block 4-Bolt Main 4.000" Bore 1-Piece Rear Main Seal Rotating Assembly: Cast Crankshaft 3.000" Stroke OEM Type 5.090" Connecting Rods Hypereutectic Pistons 50oz External Balance Cylinder Heads: BluePrint Aluminum Cylinder Heads - HP9009 60cc Chamber 2.02" Intake / 1.60" Exhaust Valves 190cc Intake / 60cc Exhaust Runners Cam Specs: Cam Type: Roller .533 Intake / .544 Exhaust Lift 215 Intake / 220 Exhaust Duration @.050-114 Degree Lobe Separation Ignition Timing: 34 Degrees Total at 3500 RPM Also Includes: Dual Plane, Satin Aluminum Intake Manifold Holley Sniper 2 EFI System Spark Plugs and Wires Distributor Valve Covers Dual/Rear Sump Oil Pan Assembled with Complete 4R70W 4WD Ready – Automatic Transmission Package: Includes Electronic Transmission Controller Transmission Built to 650 HP 2200-2600 Stall Torque Converter Flex Plate Starter TPS Breakout Harness Included for Integration with Transmission Controller 4 Speed, Overdrive transmission w/Lockup Specifically Prepped for Dana 20 Transfer Case (1966-1976). Transfer case is NOT included. GEAR RATIOS First: 2.84 :1. Second: 1.55 :1. Third: 1.00 :1. Overdrive: 0.70 :1. Reverse: 2.32 :1. Accessory Drive Installed and Included: Front Accessory Drive with A/C Compressor, Water Pump, Alternator and Power Steering Pump Notes: The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. Note that 4R70W transmission may require modifications/replacement of driveshaft, transmission mount, exhaust routing, etc. This engine can be used on all vehicles that were manufactured before emissions control regulations were imposed. These vehicles are considered "uncontrolled vehicles." Uncontrolled Vehicles are Defined as: 1965 and older U.S. manufactured California Certified vehicles 1967 and older U.S. manufactured Federally Certified vehicles 1967 and older Foreign manufactured vehicles Package Ships assembled as pictured.