Ford Small Block Compatible 302 c.i. Engine and 4R70W Automatic Transmission - 370 Horsepower - Standard Edition Builder Series with Polished Pulley Kit - Fuel Injected

Ford Small Block Compatible 302 c.i. Engine and 4R70W Automatic Transmission - 370 Horsepower - Standard Edition Builder Series with Polished Pulley Kit - Fuel Injected

$20,049.00

Description:  Horsepower & Torque: 370 Horsepower / 350 ft. lbs. Torque Compression Ratio: 9.5:1 Aluminum Heads Hydraulic Roller Cam Cast Crank Hypereutectic Pistons Block: BluePrint Engines High-Strength Cast Iron Block Increased Deck Thickness and Strength Webbing Priority Main Oiling 4.000" Bore 4-Bolt Main 1-Piece Rear Main Seal Improved Water Jacket Design Rotating Assembly: Ford, Machined and Balanced by BluePrint Engines 3.000" Stroke OEM Type 5.090” Connecting Rods Hypereutectic Pistons 50oz Externally Balanced Cylinder Heads: BluePrint Aluminum Cylinder Heads - HP9009 60cc Chamber 2.02" Intake / 1.60" Exhaust Valves 190cc Intake / 60cc Exhaust Runners Cam Specs: Cam Type: Roller .543 Intake / .554 Exhaust Lift 218 Intake / 226 Exhaust Duration @.050-112 Degree Lobe Separation Ignition Timing: 34 Degrees Total at 3500 RPM Also Includes: Holley Sniper 2 EFI System EFI Fuel Pump Kit Intake Manifold Water Pump Spark Plugs and Wires Valve Covers Distributor Harmonic Balancer Painted Oil Pan Thermostat and Thermostat Housing Assembled with Complete 4R70W Automatic Transmission Package: Includes Electronic Transmission Controller Transmission Built to 650 HP 2200-2600 Stall Torque Converter Flex Plate Starter TPS Harness Included for Integration with Transmission Controller and EFI. 4 Speed, Overdrive Transmission w/Lockup GEAR RATIOS First: 2.84 :1. Second: 1.55 :1. Third: 1.00 :1. Overdrive: 0.70 :1. Reverse: 2.32 :1. Accessory Drive Installed and Included: Front Accessory Drive with A/C Compressor, Water Pump, Alternator and Power Steering Pump  Notes: The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment.  Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. Note that 4R70W transmission may require modifications/replacement of driveshaft, transmission mount, exhaust routing, etc.  Not for use in pollution-controlled vehicles. *A bronze distributor gear is NOT recommended on this engine PACKAGE SHIPS ASSEMBLED AS PICTURED.  IF THIS IS BEING ORDERED FOR A FACTORY FIVE VEHICLE, STOP AND CALL US AT 1-800 483-4263 FOR PROPER FITMENT OR VISIT FACTORYFIVEENGINES.COM  

Show More Show Less