Ford Small Block Compatible 302 c.i. Engine and TKX Manual Transmission - 370 Horsepower - Standard Edition Builder Series with Polished Pulley Kit - Carbureted
Description: Horsepower & Torque: 370 Horsepower / 350 ft. lbs. Torque Compression Ratio: 9.5:1 Aluminum Heads Hydraulic Roller Cam Cast Crank Hypereutectic Pistons Block: BluePrint Engines High-Strength Cast Iron Block Increased Deck Thickness and Strength Webbing Priority Main Oiling 4.000" Bore 4-Bolt Main 1-Piece Rear Main Seal Improved Water Jacket Design Rotating Assembly: Ford, Machined and Balanced by BluePrint Engines 3.000" Stroke OEM Type 5.090” Connecting Rods Hypereutectic Pistons 50oz External Balance Cylinder Heads: BluePrint Aluminum Cylinder Heads - HP9009 60cc Chamber 2.02" Intake / 1.60" Exhaust Valves 190cc Intake / 60cc Exhaust Runners Cam Specs: Cam Type: Roller .543 Intake / .554 Exhaust Lift 218 Intake / 226 Exhaust Duration @.050-112 Degree Lobe Separation Ignition Timing: 34 Degrees Total at 3500 RPM Also Includes: Holley Street Warrior 600cfm Vacuum Secondary Carburetor w/ Electric Choke Front accessory drive with A/C Compressor, Water Pump, Alternator and Power Steering Pump Fuel Pump Intake Manifold Water Pump Spark Plugs and Wires Valve Covers MSD Pro Billet Distributor Harmonic Balancer Painted Oil Pan 7qt Thermostat and Thermostat Housing Assembled with Complete TKX Transmission Package: Mcleod Super Street Pro Single Disk Clutch Hydraulic Throw Out Bearing Aluminum Bell Housing Flywheel Engine Guard Starter First Gear Ratio: 2.87:1 Second Gear Ratio: 1.89:1 Third Gear Ratio: 1.28:1 Fourth Gear Ratio: 1.00:1 Fifth Gear Ratio: 0.81:1 Notes: Not for use in pollution-controlled vehicles. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. This engine is not compatible with factory fuel injection. PACKAGE SHIPS ASSEMBLED AS PICTURED. IF THIS IS BEING ORDERED FOR A FACTORY FIVE VEHICLE, STOP AND CALL US AT 1-800-483-4263 FOR PROPER FITMENT OR VISIT FACTORYFIVEENGINES.COM *A bronze distributor gear is NOT recommended on this engine