Ford Small Block Compatible 347 c.i. Engine and 4R70W Automatic Transmission - 415 Horsepower - Standard Edition Builder Series with Polished Pulley Kit - Fuel Injected

Description:  Horsepower & Torque: 415 Horsepower / 415 ft. lbs. Torque Compression Ratio: 10.0:1 Aluminum Heads Hydraulic Roller Cam Cast Crank Forged Pistons Block: BluePrint Engines High Strength Cast Iron block Increased Deck Thickness and Strength Webbing Priority Main Oiling 4.000" Bore 4-Bolt Main 1-Piece Rear Main Seal Improved Water Jacket Design Rotating Assembly: BluePrint Cast Crankshaft 3.400" Stroke Forged I-Beam 5.400" Connecting Rods Forged Pistons 28oz Externally Balanced Front and Rear Cylinder Heads: BluePrint Aluminum Cylinder Heads - HP9009 60cc Chamber 2.02" Intake / 1.60" Exhaust Valves 190cc Intake / 65cc Exhaust Runners Cam Specs: Hydraulic Roller .543 Intake / .554 Exhaust Lift 218 Intake / 226 Exhaust Duration @.050-112 Degree Lobe Separation Ignition Timing: 34 Degrees Total at 3500 RPM Also Includes: Dual Plane, Satin Aluminum Intake Manifold Holley Sniper 2 EFI System Pro Billet Distributor Mustang Style Valve Covers 7 Quart Oil Pan Dyno Tested and Shipped with Results EFI Fuel Pump Kit Front Accessory Drive with A/C Compressor, Power Steering, Alternator, and Water Pump Assembled with Complete 4R70W Automatic Transmission Package: Includes Electronic Transmission Controller Transmission Built to 650 HP 2200-2600 Stall Torque Converter Flex Plate Starter TPS Harness Included for Integration with Transmission Controller and EFI. 4 Speed, Overdrive Transmission w/Lockup GEAR RATIOS First: 2.84 :1. Second: 1.55 :1. Third: 1.00 :1. Overdrive: 0.70 :1. Reverse: 2.32 :1. Notes: Note that 4R70W transmission may require modifications/replacement of driveshaft, transmission mount, exhaust routing, etc.  The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment.  Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. Package Ships assembled as pictured.  IF THIS IS BEING ORDERED FOR A FACTORY FIVE VEHICLE, STOP AND CALL US AT 1-800-483-4263 FOR PROPER FITMENT OR VISIT FACTORYFIVEENGINES.COM