Ford Small Block Compatible 347 c.i. Engine and 4R70W Automatic Transmission - 415 Horsepower - Mustang Edition Builder Series with Polished Pulley Kit - Carbureted
Description: Horsepower & Torque: 415 Horsepower / 415 ft. lbs. Torque Compression Ratio: 10.0:1 Aluminum Heads Cast Crank Hydraulic Roller Cam Block: BluePrint Engines High Strength Cast Iron Block Increased Deck Thickness and Strength Webbing Priority Main Oiling 4.000" Bore 4-Bolt Main 1-Piece Rear Main Seal Improved Water Jacket Design Rotating Assembly: Cast Crank 3.400" Stroke Forged 5.400" Connecting Rods Forged Pistons 28oz Externally Balanced Front and Rear Cylinder Heads: BluePrint Aluminum Cylinder Heads - HP9009 60cc Chamber 2.02" Intake / 1.60" Exhaust Valves 190cc Intake / 60cc Exhaust Runners Cam Specs: Hydraulic Roller Cam .543 Intake / .554 Exhaust Lift 218 Intake / 226 Exhaust Duration @.050-112 Degree Lobe Separation Ignition Timing: 34 Degrees Total at 3500 RPM Also Includes: Holley Street Warrior 600cfm Vacuum Secondary Carburetor w/ Electric Choke Front Accessory Drive with A/C Compressor, Power Steering Pump, Alternator, and Water Pump Mustang Style Valve covers *Mustang scripted valve cover may be different than pictured based on availability* Dual Plane, Satin Aluminum Intake Manifold Thermostat and Thermostat Housing Pro Billet Distributor 7 Quart Oil Pan Electric Fuel Pump Assembled with Complete 4R70W Automatic Transmission Package: Includes Electronic Transmission Controller Transmission Built to 650 HP 2200-2600 Stall Torque Converter Flex Plate Starter 4 Speed, Overdrive Transmission w/Lockup GEAR RATIOS First: 2.84 :1. Second: 1.55 :1. Third: 1.00 :1. Overdrive: 0.70 :1. Reverse: 2.32 :1. Notes: Does not include TPS, as varies with carb or EFI type. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. Note that 4R70W transmission may require modifications/replacement of driveshaft, transmission mount, exhaust routing, etc. Package Ships assembled as pictured. IF THIS IS BEING ORDERED FOR A FACTORY FIVE VEHICLE, STOP AND CALL US AT 1-800-483-4263 FOR PROPER FITMENT OR VISIT FACTORYFIVEENGINES.COM