Ford Small Block Compatible 347 c.i. Engine and TKX Manual Transmission - 415 Horsepower - Mustang Edition Builder Series with Polished Pulley Kit - Fuel Injected

Description:  Horsepower & Torque: 415 Horsepower / 415 ft. lbs. Torque Compression Ratio: 10.0:1 Aluminum Heads Hydraulic Roller Cam Cast Crank Forged Pistons Block: BluePrint Engines High Strength Cast Iron Block Increased Deck Thickness and Strength Webbing Priority Main Oiling 4.000" Bore 4-Bolt Main 1-Piece Rear Main Seal Improved Water Jacket Design Rotating Assembly: Cast Crankshaft 3.400" Stroke Forged I-Beam 5.400" Connecting Rods Forged Pistons 28oz Externally Balanced Front and Rear Cylinder Heads: BluePrint Aluminum Cylinder Heads - HP9009 60cc Chamber 2.02" Intake / 1.60" Exhaust Valves 190cc Intake / 65cc Exhaust Runners Cam Specs: Hydraulic Roller .543 Intake / .554 Exhaust Lift 218 Intake / 226 Exhaust Duration @.050-112 Degree Lobe Separation Ignition Timing: 34 Degrees Total at 3500 RPM Also Includes: Dual Plane, Satin Aluminum Intake Manifold Holley Sniper 2 EFI System Pro Billet Distributor Mustang Style Valve covers *Mustang scripted valve cover may be different than pictured based on availability* 7 Quart Oil Pan EFI Fuel Pump Kit Front Accessory Drive with A/C Compressor, Power Steering Pump, Alternator, and Water Pump Thermostat and Thermostat Housing Assembled with Complete TKX Transmisison Package: Mcleod Super Street Pro Single Disk Clutch Hydraulic Throw Out Bearing Aluminum Bell Housing Billet Flywheel Engine Guard Starter First Gear Ratio: 2.87:1 Second Gear Ratio: 1.89:1 Third Gear Ratio: 1.28:1 Fourth Gear Ratio: 1.00:1 Fifth Gear Ratio: 0.81:1 Notes: Package Ships assembled as pictured.  The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment.  Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. IF THIS IS BEING ORDERED FOR A FACTORY FIVE VEHICLE, STOP AND CALL US AT 1-800-483-4263 FOR PROPER FITMENT OR VISIT FACTORYFIVEENGINES.COM