Chrysler Small Block Compatible 408 c.i. Engine and 727 Automatic Transmission - 465 Horsepower - Standard Edition Builder Series with Polished Pulley Kit - Carbureted

Description: Horsepower & Torque: 465 Horsepower / 494 FT. LBS. Torque Compression Ratio: 10:1 Aluminum Heads Roller Cam Cast Crank Forged Pistons Block: Hand-Picked Seasoned Magnum Block Square and Parallel Decked Align Honed Main Bearing Bore Cylinders Honed on Computer Controlled Machine to Within .0002 Straightness and Roundness Cylinders are Sonic Tested for Thickness 2-Bolt Main 4.040" Bore 2-Piece Rear Main Seal Mech Fuel Pump Provision: Yes Rotating Assembly: Cast Crankshaft 4.000" Stroke Forged Magnum 6.123" Connecting Rods w/ 150,000 PSI Bolts Forged Pistons Externally Balanced Front and Rear Cylinder Heads: BluePrint Engines Assembled and Machined Edelbrock 61769 Casting Aluminum Magnum Pattern Cylinder Heads - 58cc chamber Aluminum Roller Rockers 2.02" intake / 1.60" Exhaust Valves 176cc intake / 75cc Exhaust Runners Cam Specs: Cam Type: Roller .544 Intake / .541 Exhaust Lift 236 Intake / 242 Exhaust Duration @.050-110 Degree Lobe Separation Ignition Timing: 34 Degrees Total at 4000 RPM Also Includes: Valve Covers Oil Pan Timing Cover Holley 750 cfm Carburetor Water Pump Spark Plugs and Wires Distributor Water Neck Thermostat and Thermostat Housing Fuel Pump and Fuel Line Harmonic Balancer Air Cleaner Front Accessory Drive with Alternator, A/C Compressor, Power Steering Pump, and Water Pump  Performance 727 Transmission with 2200-2600 Stall. 10-inch Torque Converter Performance Built Transmission Starter Notes: The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment.  Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. Non-A/C front accessory drives are also available.