GM Small Block Compatible 383 c.i. Engine and 700R4 Automatic Transmission 4WD Ready - 405 Horsepower - Truck Edition Builder Series with Polished Pulley Kit - Carbureted

**This package features a carbureted engine and automatic transmission. EFI and manual transmission pictured as rep image. Description: Horsepower & Torque: 405 Horsepower / 446 FT. LBS. Torque Compression Ratio: 10.0:1 Aluminum Heads Hydraulic Roller Cam Cast Crank Hypereutectic Pistons Block: BluePrint Engines High Strength Cast Iron Block Manufactured and Machined in the USA! 4-Bolt Main 4.000" Bore 1-Piece Rear Main Seal Mech Fuel Pump Provision: Yes Passenger Side Dipstick Drilled and Tapped for Clutch Linkage Rotating Assembly: Cast Crankshaft 3.750" Stroke OEM Type 5.700" Connecting Rods w/ 150,000 PSI Bolts Hypereutectic Pistons Externally Balanced Front and Rear Cylinder Heads: BluePrint Aluminum Cylinder Heads - H8002K 64cc Chamber 2.02" Intake / 1.60" Exhaust Valves 195cc Intake / 75cc Exhaust Runners Cam Specs: Cam Type: Roller .495 Intake / .502 Exhaust Lift 220 Intake / 224 Exhaust Duration @ .050-114 Degree Lobe Separation  Also Includes: Intake Manifold Dual Plane, Satin Aluminum 750cfm Carburetor Valve Covers Oil Pan Timing Cover Fuel Pump Spark Plugs and Wires Thermostat and Thermostat Housing Oil Filter Plug Wire Separators Polished Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump Assembled with Complete Transfer Case Ready 700r4 Automatic Transmission Package: 700R4 Complete Package. Features 4wd 27 Spline Stub Shaft, and Transfer Case Ready, 4wd Case. 2200-2400 Stall Torque Converter Flex Plate Starter Recommended Break in Oil: BPP710 (Click Here) Recommended Service Oil: BPP10W30 (Click Here) Recommended Oil Filter: BPP51061 (Click Here) Notes: This engine features a true 4-inch bore, which mathematically yields 377 CID with a 3.75-inch stroke. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment.  Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. Package Ships assembled as pictured.  Due to numerous tire/rear gear combinations, this transmission does NOT ship with a speedometer gear or sender housing.  Does not include a 2wd tail housing. Will have extended 4wd output shaft, designed for transfer case to bolt directly to transmission case.  The performance aluminum cylinder heads on this engine feature a .500 raised port vs OEM.