GM Small Block Compatible 400 c.i. Engine and TKX Manual Transmission - 500 Horsepower - Standard Edition Builder Series with Polished Pulley Kit - Fuel Injected

Description: Horsepower & Torque: 500 Horsepower / 500 FT. LBS. Torque Compression Ratio: 10.3:1 Aluminum Heads Hydraulic Roller Cam Forged Crank Forged Pistons Block: BluePrint Engines High Strength Cast Iron Block Manufactured and Machined in the USA! 4-Bolt Main 4.125" Bore 1-Piece Rear Main Seal Mech Fuel Pump Provision: Yes Passenger Side Dipstick Drilled and Tapped for Clutch Linkage Rotating Assembly: New BluePrint Forged Crankshaft 3.750" Stroke Forged I Beam 5.700" Connecting Rods w/ 150,000 PSI Bolts Forged Pistons Internally Balanced Front - Externally Balanced Rear  Cylinder Heads: BluePrint Aluminum Cylinder Heads - HP8103 64cc chamber 2.08" Intake / 1.60" Exhaust Valves 220cc Intake / 67cc Exhaust Runners Cam Specs: Cam Type: Roller .555 Intake / .576 Exhaust Lift 236 Intake / 242 Exhaust Duration @ .050-110 Degree Lobe Separation Ignition Timing: 10-16° Initial and Total Timing 32-34° at 3500 RPM Also Includes: Intake Manifold Dual Plane, Satin Aluminum Holley Sniper 2 EFI System Valve Covers Oil Pan Timing Cover EFI Fuel Pump Kit Spark Plugs and Wires Thermostat and Thermostat Housing Oil Filter Plug Wire Separators Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump Assembled with Complete TKX Transmission Package: Mcleod Super Street Pro Single Disk Clutch Hydraulic Throw Out Bearing Bell Housing Billet Flywheel Starter First Gear Ratio: 2.87:1 Second Gear Ratio: 1.89:1 Third Gear Ratio: 1.28:1 Fourth Gear Ratio: 1.00:1 Fifth Gear Ratio: 0.81:1 Notes: The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment.  Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. The performance aluminum cylinder heads on this engine feature a .500 raised port vs OEM. Package Ships assembled as pictured.  IF THIS IS BEING ORDERED FOR A FACTORY FIVE VEHICLE, STOP AND CALL US AT 1-800-483-4263 FOR PROPER FITMENT OR VISIT FACTORYFIVEENGINES.COM