Sublimation Coffee Cup

11oz blank sublimation ceramic coffee mugs. These can also be used with UV DTF  The recommended settings below may need adjustments for the best results. Settings will vary depending on the heat press brand and model ink and paper and atmospheric conditions. The substrate should be at room temperature  Specification Mug Press: 385°F Time: 190 seconds depending on artwork Steps: 1. Cut your transfers so that the transfer is slightly larger vertically thanthe mug.2. Position the substrate onto the transfer.3. Tape two ends of the transfer allowing for the gap in the mug press where it will close.4. Wrap a piece of scratch paper around the transfer and mug taping if necessary.5. Center the transfer and mug in the mug press.6. Close the mug press using the heat press settings above.7. Remove items from the press immediately. Use heat resistant gloves if necessary - the items will be very hot.8. Remove transfer and scratch paper.Tips:- If the image of the final prod