Elitech PG-20 Digital HVAC Gauge R134a 1/8'' NPT

Digital Pressure Gauge Elitech PG-20 The gauge?measures pressure and temperature, featuring backlight, manual calibration, auto-off, units shift, low battery indicator, etc. With a battery life up to six months, the gauge is applied for monitoring pressure of pipelines and pressure vessels in refrigerant and maintenance.Features: Measure pressure and temperature; features manual calibration, auto-off, low battery indicator, etc. Pressure measuring range: -0.100 ~ 5.000MPa; pressure accuracy :¡À0.5% FS (22¡ãC ~ 28¡ãC); temperature accuracy:¡À1¡ãC Green Backlight auto-off after 6s; measurement unit: Kpa Powered by 3V CR2450 button battery and battery life up to 6 months. A wide range of application: monitoring the pressure of pipelines and pressure vessels in refrigeration and maintenance. Specification:Pressure measuring range: -0.100 ~ 5.000MPaTemperature measuring range: -20¡ãC ~70¡ãCOperating temperature and humidity: 10¡ãC ~60¡ãC; 35% ~ 85%RHResolution: Pressure: 0.001MPa; Temperature 0.1¡ãCAccuracy: Pressure: ¡À5%FS (22¡ãC ~ 28¡ãC); Temperature 0.1¡ãCBattery life: six monthsPower supply: 3V CR2450 button cellSampling Period: 1.2sBattery Indicator: displays "LOB" at low batteryDisplay: 30mm*15mm LCD/green back-light auto-off after 6sMeasurement Units: MPaOut-of-Range Alarm: pressure: FULLPrecautions: 1, Please use goggles when operating. Refrigerants are harmful to the eyes.2, Please be extremely careful when connecting pipes, there might be a compressed refrigerant pipe. Please stay the pipe end away from the nearby people.General Operation:1.On/OffPress the Power button to turn on/off the gauge.2.Temperature displayIn power-on mode, press and release power button to display temperature.Press it again to display pressure. It will display current pressure after 5 seconds idle (this function is optional).3.BacklightPress and release ZERO/LIGHT to turn on the backlight. It will be auto-off after 6 seconds idle.4.ZeroPress and hold ZERO/LIGHT for 3 seconds to zero. It will display 8.8.8.8 and then 0.000 after 3 seconds. Press and hold the button again for 3 seconds to display current relative pressure.5.Auto-OffPress and hold the power button and ZERO/LIGHT until ON appears, indicating the Auto-Off function is enabled. The gauge will be auto-off after 15 minutes idle, press and hold the two buttons again until OFF appears, the auto-Off function is disabled.