Brightlink 4K HDMI over IP RECEIVER (POE) for source / input device - Part of Brightlink’s Any Size HDMI over IP Matrix System with APP control - Video Walls up to 8x16 displays - H.264 up to 400ft/120m over Cat6 and USB KVM extension -RECEIVER ONLY-
***RECEIVER ONLY - Each source requires 1ea Transmitter and each Display requires 1ea Receiver Introducing our New Brightlink 4K HDMI over IP (POE VERSION) Any Size Matrix Distribution System with built in Video Wall Processor and controllable with Brightlinks free Pro Control App for IOS and Android. Brightlinks 4K HDMI over IP Matrix system is a flexible distribution system that allows you to create any size matrix configuration from 2 input to 2 outputs, all the way up to 100 inputs to 100 outputs and more, and easily switch them in any combination with our Brightlink Pro-Control APP. Brightlinks HDMI over IP Transmitters and Receiver work with Brightlink 24 port Gigabit switch as well as most off the shelf switches as long as they support IGMP snooping and HDCP. These are POE Version which requires a POE Switch The Transmitters (TX) convert your HDMI signal from your source into IP signal and send via Cat6 cable into your network switch where it is then distributed to your Receivers (RX) via Cat6 cable and converted back to HDMI signal to be connected to your displays. This IP Matrix system allows you to send 1080p, 4K@30hz, USB, IR and RS232 over long distances using IP networks with Cat5e/6 and Fiber cable (single mode- module insert not included). The H.264 compression allows for the video signal to be sent over these long distances and at the same time maintaining a crisp clear image. The Built in Video Wall Controller, along with Brightlink’s Pro-Control APP, allows you to create multiple video walls in sizes up to 8 vertical x 16 horizontal each, and easily switch your source / content to them. The Video Wall Controller also supports edge / bezel adjustment and image rotation which allows you to rotate your image 180 or 270 degrees to create vertical digital signage display walls, eye catching mosaic video walls, and more. This Brightlink 4K HDMI over IP Any Size Matrix Distribution System is a one stop solution for extending HDMI over Cat6 / Fibre cables, and creating eye-catching Video Wall and Digital Signage Displays which can be used in Hotels, Casinos, Sports Bars, Super Markets, Shopping Malls, Churches, Data Control Centre, Conference Rooms, Education and Training, Luxury Homes and Home Theatres. FEATURES: POE Receiver ( Receiver gets power from switch so no power supply at RX required) 4K @ 30Hz HDMI over IP Matrix / Distribution System 400ft / 120m Distances into and out of switch over single Cat5e/6 cable Matrix configuration allows for any amount of inputs (TX) to any amount outputs (RX) Control with Brightlink’s IOS and Android Control APP. Built-In Video Wall Controller allows you to create multiple Video Walls each up to 8 Vertical x 16 Horizontal Displays. Rotate screen Image from 180 to 270 degree Bezel / Edge adjustment H.264 Video compression Compatible with most Gigabit switches that support IGMP & DHCP Allows USB 2.0 passthrough RS232 bi-directional extension and RS232 control 4 bits dip switch for 16 stream channel selection Support Dolby True HD, DTS-HD Master Audio Support two-way Wide Band IR extension (38khz-56khz) - Control Source device from Display or Display from Source device. Transmitter over Fiber Optical cable up to 60km (Single mode- module insert not included) HDCP 1.4 compliant DIAGRAMS PACKAGE CONTENTS: Main Unit. HDMI Extender (Transmitter & Receiver) Power adapter DC 5V x2PCS 1xIR TX cables, 1x IR RX cables 1x Phoenix plugs for RS232 cable termination 2x screws Rear bracket x1 Operating Instruction manual SPECIFICATIONS: Performance: Protocol TCP, UDP, RTSP, RTP, DHCP, IGMP, Multicast, IPV4 Support Video format 4K@30HZ, 1080P/1080i/720P/576P/576i/480P/480i Support Audio format Stereo 192Kbps HDCP Compliant IR Frequency 38 -56 KHZ RS232 Baud rate Default 115200bps, total 8 kinds optional IP setting &Group ID setting: Default IP Automatic allocation Group ID Group 00 ~ group 16 Request for Switch/Router Support IGMP, support DHCP Connectors on Transmitter Input 1xHDMI Female port Output 1x RJ45 output, 1x Fiber output RS232 Phoenix RS232 port IR 1x IR TX port; 1x IR RX port Support 38K-56KHz Connectors on Receiver: Input 1xRJ45 input, 1x Fiber input Output 1x HDMI Female port RS232 Phoenix RS232 port IR 1x IR TX port; 1x IR RX port Support 38K-56KHz Environmental & Power Requirements: Operating temperature -5 to +35 ℃ （+23 to +95℉） Operating Humidity Range 5 to 90%RH (No Condensation) Power supply DC 5V Power consumption Max 3 watt Physical: Dimension TX: 160x103.2x30mm ; RX: 160x103.2x30mm Net Weight TX: 0.28KG ; RX:0.28KG 4K UHD HDMI over IP extension USB 2.0 over IP extension RS232 bi-directional extension and RS232 control 4 bits switch for 16 stream channel selection Support Dolby True HD, DTS-HD Master Audio Support two way Wide Band IR extension (38khz-56khz) Transmit over single Cat5e/6 cable up to 120m Transmitter over Fiber Optical cable up to 60km (Single Mode) Networking environment under Giga Ethernet switch and CAT5e cable Point to point extension, Unicast, Multicast and Video Wall system (Max 8x16) Output video rotation Output video partial enlargement 802.3af compliant POE (No need power supply when connecting with POE Switch) HDCP 1.4 compliant