CO2 Controller, Briidea Newest CO2 Monitor with Remote Sensor, Control Photocell

NEW GENERATION: Covering all the functions of CO₂ controllers on the market to meet your comprehensive demands. Photo sensor mode enables operation in daylight hours only, when no light is detected, it will turn off the CO₂ device. In off mode, detecting only and the load is always turned off. PROGRAM MODE: Featuring 6 standalone programs, the start time of each period can be freely set. The amount of CO₂ required varies from different light intensity in each period of the day. So set different CO₂ ppm value for different periods will greatly minimize CO₂ waste. NDIR CO2 SENSOR: 2-channel low drift ndir sensor precisely reads CO₂ ppm levels. It can work in extremely wet environment, not easy to corrode, rust, and with long service life. 6.56ft long sensor cable allows proper placement to the grow room. SAFE AND RELIABLE: Allowing a maximum current of 15A and 1800W power. UL-Listed components and waterproof enclosure ensure the stable quality of the whole product's safety. Also with data memory function when suddenly power off. CONVENIENT DESIGN: LCD screen is easy to view and set. Piggy back plug to avoid messy cords, plug-n-play. Two modes greenhouse and ventilation mode allowing users to simply plug the CO₂ generator or exhaust fan. Automatically turn on/off the load when needed. Specification of Briidea CO₂ Controller Input Voltage: 100~240Vac 50/60Hz Load Max Current: 15A@120Vac/10A@220Vac Load Max Wattage: <1800W(3/4hp) CO2 measurement range: 0-5000ppm CO2 measurement accuracy: ±50 ppm or ±5% of reading, whichever is greater CO2 display accuracy: 1ppm CO2 warm-up time: 3min CO2 response time: <120s Ambient temperature: -20℃~60℃/-4℉~140℉ Humidity: 0%~95%RH(Unfrozen or condensation state) Running Mode Photo Sensor Mode•When the photo sensor detects light and the CO₂ level is low, it will activates its CO₂ outlet, turning on the connected regulator or generator. •When no light is detected during the night, it will turn off the connected CO₂ device, which greatly improve the CO₂ using efficiency. •Before entering the confirmation state Day or Night state, there will be continuous 30 seconds detection. Manual ModeThe controller will turn the load on/off according to the current setting ppm at any time of the day or night. Program ModeFeaturing six stand-alone programs just like six separate timers, which means the start time of six programs can be freely set by users. The amount of CO₂ required varies from different light intensity in each period of the day. Such as when light is weak, too much CO₂ will be wasted because of weak photosynthesis. So set different CO₂ ppm value for different periods will greatly minimize CO₂ waste, realize time-sharing precise control. Off ModeIn off mode, the controller will always turn the load off but will keep detecting. Why Briidea CO₂ Controller is Perfect for You Adjustable Light Sensing SensitivityLight sensing sensitivity is the ability of the photo sensor to respond to light intensity: HI: Under strong light intensity, the sensor will respond to the daytime state. MI: Under Middle light intensity, the sensor will respond to the daytime state (default). LO: Under Low light intensity, the sensor will respond to the daytime state. Alarm FunctionYou can choose whether to use the alarm function or not. When you turn off the alarm function, the controller will not alarm whatever the CO₂ value is, to avoid too much noise. When the alarm function is turned on, the controller will alarm to remind you if the humidity value exceeds the high/low setting value. Adjustable BacklightThe screen is lit at high intensity for 8 seconds when you press any button. For the rest of the time, there are three backlight mode for you to choose : Off: The screen is not lit (default mode). On HI: The screen is lit at high intensity. On LO: The screen is lit at low intensity. Product information Product Dimensions 5 x 2 x 3 inches Item Weight 1 pounds Manufacturer briidea