Rear 1/4 Elliptical Leaf Spring Kit (complete with U-bolts & Shims)

Product Description Videos Fitment Do you have sagging, rusty, broken or fanned-out rear leaf springs on your Bugeye? Here's a kit to solve that problem! The original 15-leaf springs for the rear of a Bugeye are no longer available but we have a nice ten-leaf replacement that fits the car quite well. The only issue is that these new springs will lift the back of your Bugeye an inch or so higher than the stock leaf springs.   This kit comes with everything you will need to bring the rear of the car back to normal ride height, including: - A set (2) of new 10-leaf 1/4 elliptical leaf springs (with new bushings installed) - A set (2) of leaf spring shims to lower the car back to operating height (slide under the spring upon installing the spring in the spring box) - Stake screws to hold the shims in place (Use a 7/32" drill bit to drill through your bottom spring plate and partially into the shim, then install the self tapping screws to hold the shim in place - be sure to drill far e