ACOPOWER Lithium Battery Poly Solar Power Complete System with Battery and Inverter for RV Boat 12V Off Grid Kit - Li200Ah 1.5kW - 200W MPPT30A

ACOPOWER Lithium Battery Solar Power Complete System comes with everything you need to start Producing Free, Clean Power from the Sun! Perfect for RV's, Boats, Cabins and Back-up Power! Solar Powered Specification: 12V 100Ah LiFePO4 Deep Cycle Lithium BatteryRated voltage 12.8VCharge voltage: 14.2 - 14.6VBattery Capacity:1280WHDepth of Discharge (DoD): 100%Standard charge current: 20AMax continuous charge current: 50AMax continuous discharge current: 100Adimension(inch):12.99 x 6.81 (W) x 8.58 (H) inch;Approx. Weight: 23.8lb 12V 200Ah LiFePO4 Deep Cycle Lithium BatteryRated voltage 12.8VCharge voltage: 14.2 - 14.6VBattery Capacity:2560WHDepth of Discharge (DoD): 100%Standard charge current: 50AMax continuous charge current: 100AMax continuous discharge current: 200Adimension(inch):20.55 x 9.44 (W) x 8.58 (H) inch;Approx. Weight: 48.94lb100W Poly Solar PanelNominal for 12V battery chargerPeak Power (Pmax):100WPeak Circuit Voltage(Voc):22VMax Power Voltage(Vmp):17.48VShort Circuit Current(Isc):6.21AMax Power Current(Imp):5.72AWeight:17.6lbDimension:40.2*26.4*1.4 InchApplication Class: Class A1500W Pure Sine Wave InverterContinuous output 1500WSurge Power 3000WWave Form: Pure Sine WaveProtection: Under voltage protection, Overvoltage protection, OverloadProtection, Output short circuit protectionWeight: 7.79lbDimension(inch): 12.94+1.34 (D) x 7.52(W) x 3.86(H) inch 3000W Pure Sine Wave InverterContinuous output 3000WSurge Power 6000WWave Form: Pure Sine WaveProtection: Under voltage protection, Overvoltage protection, OverloadProtection, Output short circuit protectionWeight: 12.1lbDimension(inch): 18.23(D) x 9.53(W) x 4.65(H) inchMPPT Solar Charge Controller 30ARated charge current: 30ABattery voltage range: 8V~32VMax.PV open circuit voltage: 100VDCMax.PV input power: 12V/390W,24V/780WCompatible with Various Deep Cycle Battery options: Sealed, Gel, Flooded and Lithium-ion. LiFePO4 Multiple Load Control Method. MPPT Solar Charge Controller 40ARated charge current: 40ABattery voltage range: 8V~32VMax.PV open circuit voltage: 100VDCMax.PV input power: 12V/520W,24V/1040WCompatible with Various Deep Cycle Battery options: Sealed, Gel, Flooded and Lithium-ion. LiFePO4 Multiple Load Control Method.   MPPT Solar Charge Controller 50ARated charge current: 50ABattery voltage range: 8V~68VMax.PV open circuit voltage: 150VMax.PV input power: 12V/625W,24V/1250W,36V/1875W,48V/2500WCompatible with Various Deep Cycle Battery options: Sealed(Defalut)/Gel/Flooded/User. Lead-acid batteries and Lithium-ion batteries MPPT Solar Charge Controller 60ARated charge current: 60ABattery voltage range: 8V~68VMax.PV open circuit voltage: 150VMax.PV input power: 12V/750W,24V/1500W,36V/2250W,48V/3000WCompatible with Various Deep Cycle Battery options:Sealed(Defalut)/Gel/Flooded/User. Lead-acid batteries and Lithium-ion batteries   SKU Battery Solar Panel Inverter Charge Controller Monitor Switch Fuse Z Bracket Battery Cable All necessary Cables HYL200AH-P200W 2pcs 100Ah 2pcs 100W 1.5kw 30A 1pc 1pc 60A 2 sets 2 Pairs Y HYL200AH-P300W 2pcs 100Ah 3pcs 100W 1.5kw 30A 1pc 1pc 60A 3 sets 2 Pairs Y HYL200AH-P400W 2pcs 100Ah 4pcs 100W 1.5kw 40A 1pc 1pc 60A 4 sets 2 Pairs Y HYL200AH-P500W 2pcs 100Ah 5pcs 100W 1.5kw 40A 1pc 1pc 60A 5 sets 2 Pairs Y HYL200AH-P600W 2pcs 100Ah 6pcs 100W 1.5kw 50A 1pc 1pc 60A 6 sets 2 Pairs Y HYL200AH-P800W 2pcs 100Ah 8pcs 100W 1.5kw 60A 1pc 1pc 60A 8 sets 2 Pairs Y HYL300AH-P200W 3pcs 100Ah 2pcs 100W 1.5kw 30A 1pc 1pc 60A 2 sets 3 Pairs Y HYL300AH-P300W 3pcs 100Ah 3pcs 100W 1.5kw 30A 1pc 1pc 60A 3 sets 3 Pairs Y HYL300AH-P400W 3pcs 100Ah 4pcs 100W 1.5kw 40A 1pc 1pc 60A 4 sets 3 Pairs Y HYL300AH-P500W 3pcs 100Ah 5pcs 100W 1.5kw 40A 1pc 1pc 60A 5 sets 3 Pairs Y HYL300AH-P600W 3pcs 100Ah 6pcs 100W 1.5kw 50A 1pc 1pc 60A 6 sets 3 Pairs Y HYL300AH-M800W 3pcs 100Ah 8pcs 100W 1.5kw 60A 1pc 1pc 60A 8 sets 3 Pairs Y HYL400AH-P400W 2pcs 200Ah 4pcs 100W 3kw 40A 1pc 1pc 60A 4 sets 2 Pairs Y HYL400AH-P500W 2pcs 200Ah 5pcs 100W 3kw 40A 1pc 1pc 60A 5 sets 2 Pairs Y HYL400AH-P600W 2pcs 200Ah 6pcs 100W 3kw 50A 1pc 1pc 60A 6 sets 2 Pairs Y HYL400AH-P800W 2pcs 200Ah 8pcs 100W 3kw 60A 1pc 1pc 60A 8 sets 2 Pairs Y HYL600AH-P600W 3pcs 200Ah 6pcs 100W 3kw 50A 1 1 60A 6 sets 3 Pairs Y HYL600AH-P800W 3pcs 200Ah 8pcs 100W 3kw 60A 1 1 60A 8 sets 3 Pairs Y   Warranty and Return/ Exchange Policy: Limited WarrantyBuild The Power warrants to the original consumer purchaser that the Build The Power product will be free from defects in workmanship and material under normal consumer use during the applicable warranty period identified in the 'Warranty Period' section below, subject to the exclusions set forth below.This warranty statement sets forth Build The Power's total and exclusive warranty obligation. We will not assume, nor authorize any person to assume for us, any other liability in connection with the sale of our products. Warranty PeriodThe warranty period for Build The Power products ranges from 0-24 months. In each case, the warranty period is measured starting on the date of purchase by the original consumer purchaser. The sales receipt from the first consumer purchase, or other reasonable documentary proof, is required in order to establish the start date of the warranty period.ExchangeBuild The Power will replace (at Build The Power's expense) any Build The Power product that fails to operate during the applicable warranty period due to defect in workmanship or material. A replacement product assumes the remaining warranty of the original product.Limited to Original Consumer BuyerThe warranty on Build The Power's product is limited to the original consumer purchaser and is not transferable to any subsequent owner.ExclusionsBuild The Power's warranty does not apply to:·Misused, abused, modified, damaged by accident, or used for anything other than normal consumer use as authorized in Build The Power's current product literature.·Attempted repair by anyone other than an authorized facility·Any product purchased through an online auction house.·Build The Power's warranty does not apply to the battery cell unless the battery cell is fully charged by you within seven days after you purchase the product and at least once every 6 months thereafter.Customer Support : sales@BuildThePower.comTo obtain warranty service, contact our customer service team at sales@BuildThePower.com RefundBuild The Power offers a 30-day money back guarantee for goods purchased directly from Build The Power.com. We are confident that you will love your new Build The Power product. However, if you are unsatisfied for any reason, simply let us know within 30 days. Once we receive the product and confirm the validity, we will refund the full purchase price.（If the product does not have any quality problems, the shipping cost needs to be borne by the buyer） Products returned outside of 30 days require special authorization. Any return submitted for a refund will be subject to a 10% restocking fee and shipping costs. To return an item, please contact us via phone number (626) 575-7722or email sales@BuildThePower.com during our normal business hours. In order to return your product under the 30-day return policy, please check that:You have purchased the product directly from Build The Power.com. You contact Build The Power and begin the return process within 30 days from the original shipment date. The product is returned in the original packaging, with all materials included, in new or as-new condition, and be accompanied with a return authorization number.Late or missing refundsIf you haven't received a refund yet, first check your bank account again. If payment was made by credit card, once we receive the product we will credit your account. Please allow 7-10 business days for a credit to appear on your credit card statement.Then contact your credit card company, it may take some time before your refund is officially posted. Next contact your bank. There is often some processing time before a refund is posted. If you've done all of this and you still have not received your refund, please contact us at sales@BuildThePower.comReturn & Refund ConditionsPlease carefully read conditions below. If conditions are not met, Build The Power reserves the right to refuse the exchange or refund. Please note that Build The Power does not permit the return of or offer refunds for the following products:Product that is custom configured or branded to your specifications.Product purchased from a 3rd party retail partner.How to Return an ItemTo return an item you'll need to obtain a Return Material Authorization (RMA) number. Build The Power will not accept returns without prior authorization and an RMA number. You can get an RMA form by contacting us via telephone or email for assistance.Process for Returning Product1. Obtain a Return Merchandise Authorization (RMA) Number:All returns must have an RMA number for processing. Contact Build The Power at sales@BuildThePower.com for assistance.2. Write the RMA number on the shipping label on the outside of the package.RMA numbers should be clearly displayed on the return shipping label of any package being returned to Build The Power. Do not write the RMA number on the actual box. Packages without an RMA number on the return shipping label may not be accepted by our warehouse.