Lutron LRF2-OCR2B-P-WH Radio Power Saver Wireless Ceiling-Mounted Sensor

Please call us at 877-487-4444 to purchase this product or email us at buyriteelectric@gmail.com LutronR Radio Powr SavrT occupancy/vacancy sensors are wireless, battery-powered passive infrared (PIR) sensors that automatically control lights via RF communication to compatible dimming and switching devices. These sensors detect the heat from people (IR radiation of 9.5 μm) moving within an area to determine when the space is occupied. ThE sensors then wirelessly transmit the appropriate commands to the associated dimming and switching devices to turn the lights on or off automatically. They combine both convenience and exceptional energy savings potential along with ease of installation. FEATURES: Wireless occupancy sensor has 3 settings available: Auto-On/Auto-Off, Auto-On Low-Light/Auto-Off, and Manual-On/Auto-OffAuto-On Low-Light feature will only turn lights on automatically if there is less than approximately 10 Lux (1 fc) of ambient light Vacancy only model available to meet California (U.S.A.) Title 24 requirementsUses Clear ConnectR technologyPassive infrared motion detection with exclusive LutronR XCTTM Technology for fine motion detection360˚ coverage ranges from 324 ft2 (30.2 m2) to 676 ft2 (62.4 m2), depending on mounting heightSimple and intuitive adjustments available for Timeout, Auto-On, and Activity settingsSupports advanced occupancy features, such as dependent occupancy groups and customizableoccupied/unoccupied presets in some systemsMultiple sensors can be added for extended coverage—refer to product specification submittal of receiving device to determine system limitsLens illuminates during test mode to verify ideal locationsMultiple ceiling-mount methods available for different ceiling materialsFront accessible test buttons make programming easy10-year battery life designRoHS compliant SPECIFICATIONS: Operating voltage: 3 V-Operating current: 14 μA nominalRequires one CR 123 lithium battery10-year battery lifeNon-volatile memory (saved changes are stored during power loss)Temperature: 32 ˚F to 104 ˚F (0 ˚C to 40 ˚C)For indoor use onlyRange: LRF2-, LRF5-, LRF7- Local load controls must be located within 60 ft (18 m) line of sight, or 30 ft (9 m), through walls, of a sensor.LRF6- Local load controls must be located within 40 ft (12.2 m) line of sight or 23 ft (7 m), through walls, of sensor.Sensor Coverage Test:Front accessible test buttonLens illuminates orange in response to motion during test mode and is visible from 60 ft (18m)Wireless Communication Test:Front accessible test buttonTurn associated loads on and offTimeout Options:1 minute5 minutes15 minutes – default setting30 minutes