GEPRC TAKER F722 BLS 60A V2 STACK
Features Use mainstream STM32F722 chip Equipped with the latest 42688-P gyroscope 16M black box storage Integrated LC filter Upgrade type-C USB interface Directly plugged into the DJI Air Unit With TAKER H60_BLS 60A 4IN1 ESC, the flying feel is silky Simple and reasonable installation method, the shock absorber can make the gyroscope work very stably 9V@2.5A + 5V@3A dual independent BEC Specifications GEP-F722-HD v2 Flight Controller MCU：STM32F722 IMU：ICM42688-P(SPI) Air Unit Connection：Direct plugging into DJI Air Unit Black Box：16M onboard USB Interface：Type-C OSD：BetaFlight OSD w/ AT7456E chip BEC：5V@3A,9V@2.5A dual BEC Firmware Target：GEPRCF722 Size：36.85×36.85mm, hole 30.5×30.5mm，φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle. Input Voltage：3-6S LiPo UART：5 Power Filter：Integrated LC filter Weight：8.1g TAKER H60_BLS 60A 4IN1 ESC Input Voltage: 3-6S Lipo Ammeter: Support Continue Current：60A Burst Current：65A（5 second） Support Protocol: Dshot 150/300/600 Size：42×45.7mm，hole30.5×30.5mm，φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring. Weight: 14.9g Target: B_X_30 Includes 1 x Flight Controller 1 x ESC 1 x Capacitor 1 x DJI Air Unit Adapter Cable 1 x Flight Controller Adapter Cable 1 x XT60 Power cable 4 x M3*30 Screws 4 x M3*25 Screws 8 x Nylon nuts 8 x Silicone grommets 2 x sh1.0 4pinsilicone cable 1 x Camera connection cable