PRV Audio WG2000Py SLIM 2" Exit Mids & Highs Compression Driver With Horn

Features The WG2000Py SLIM is a Shallow mount 2? horn driver featuring a Polyimide Pro Audio Compression Driver with a 2 exit WGP14-50X Slim Waveguide. This is a top-of-the-line horn driver designed to offer unsurpassed natural upper midrange and high frequency response at high sensitivity, with crystal clear natural sound from the Polyimide diaphragm. Polyimide diaphragm with large 2.0? Voice Coil, providing dynamic output along with excellent efficiency 107 dB Sensitivity Mids & Highs 2? Exit Driver + Shallow Horn WGP14-50X Perfect as compression driver for car audio Crystal clear natural sound with wider response from 1000 to 17,000 Hz PRO Audio horn driver, able to handle 150 Watts Continuous Program Power (RMS) with music Compact driver mounted on slim horn, ideal for tight spaces, increase sound output on your system with this slim solution. Great choice for custom car audio door panels The drivers small diameter allows front mounting, making it easy to install without detaching the driver from the WGP14-50X Horn. Its design was developed to give custom doors a new solution for a shallow horn driver, its 2.0 voice coil allows it to push more power into it, increasing its output tremendously because of its low mass diaphragm. The specially designed Polyimide diaphragm provides durability and additional damping for natural sound quality. This technology raises the bar for high frequency drivers by giving the driver wider usable bandwidth for smooth, dynamic output along with excellent efficiency. The Polyimide diaphragms supersede titanium diaphragms, being able to play low frequencies without shattering and performing more accurately at high frequencies. PRV Audio WG2000Py SLIM Shallow Mount 2? Exit Mids & Highs Horn Driver 150 Watts 8 Ohm Compression Horn driver for Car Audio GENERAL SPECIFICATIONS Exit Throat Diameter 2 (50 mm) Nominal impedance 8 Ohm Nominal Power Handling 75 Watts Continuous Program Power (RMS)** 150 Watts Peak Power 300 Watts Sensitivity 2.83V at 1m 107 dB Recommended Hi Pass Crossover For Full Power Handling 1000 Hz 12db Per Octave Crossover Frequency Response at -10dB 1000 17,000 Hz Voice Coil Diameter 2(51 mm) Voice Coil Wire CCAW Voice Coil Former Material Kapton Diaphragm Material Polyimide Flux Density 2.10 T Magnet Material Ferrite *Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle con...