Veratron NavBox Electronic Control Unit [A2C59501979]

NavBox Electronic Control UnitThe AcquaLink® NavBox is the core of the AcquaLink® VDO Marine system. It acts as a CPU and signal interface. The NavBox provides a wide range of digital and analog input possibilities. It supports up to four electronic engines (J1939 or NMEA 2000®) or one analog engine. It also features two VDO Marine Sumlog® paddle wheel sensor and one analog VDO Marine Windsensor connections, so legacy VDO Marine products can be used and brought to the digital age. NavSensor reads following analog data:  Engine Oil Pressure  Engine Oil Temperature  Engine Coolant Temperature  Transmission Oil Pressure  Fresh Water, Waste Water and Fuel Level  Voltage  Rudder Angle  Engine Frequency  Battery Current  Pyrometer  It also features a NMEA 0183 input and output port as well as a buzzer output. All received data are converted and sent to the NMEA 2000® network and to the VDO Marine Bus. This gateway function allows displaying engine, liquid level, pressure, temperature and other vital information on any compatible display on the NMEA 2000® network or on designed VDO Marine AcquaLink® gauges or TFT Displays. The configuration of the NavBox can be done by using an AcquaLink® TFT and NavControl or by using the intuitive VDO Marine diagnostic tool. Reverse polarity protection  NMEA 2000® certified  LED signal status indication  Aluminum base plate  Front & rear side protection rating IPX4  3x VDO Marine bus lines  1x J1939 CAN bus  1x NMEA 2000® bus  1x VDO Marine Analog Wind Sensor Input  2x VDO Marine Sumlog® Inputs  AMP Super Seal power input  26 pin AUX input (analog signals, NMEA 0183)  Operating temperature range -20°C/+70°C This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.