Hunter - PGV-101-G - 1'' Globe Valve w/ Flow Control (FPT x FPT)
PGV-101-G - 1" Plastic Globe Valve with Flow Control, Female NPT Inlet and Outlet The Hunter PGV Valve is a professional grade line of valves that are built to work with a broad range of landscaping demands. All models feature durable, high-grade, corrosive and UV-resistant PVC construction, glass reinforced jarring and a rugged double-beaded, leak-proof diaphragm with support to prevent stress failure. This top-of-the-line valve has an internal manual bleed as well as dependable Hunter solenoid for long life and operation. Flow Control maximizes efficiency and prolongs the life of a system by fine tuning flow and pressure for each zone. Features Size: 1'' Female Pipe Thread The flow control knob works very similar to a hose bib or gate valve as its main function is to either fully allow or restrict the amount of water passing through the valve. External and internal manual bleed allows quick and easy ''at the valve'' activation Captive bonnet screws eliminate the possibility of lost parts during disassembly Triple-tool bonnet screws are compatible with standard or Phillips screwdrivers as well as a nut driver Double-beaded diaphragm seal design for superior leak-free performance Encapsulated 24 VAC solenoid with captive plunger for hassle-free service Optional DC latching solenoids enable Hunters battery-powered controllers (PGV-101-G-DC has the DC Latching Solenoid pre-installed) Low flow capability allows use of Hunters micro irrigation products All Hunter valves are 100% water-tested before leaving the factory to verify every valve operates properly and give you total peace of mind after installation. Operating Specifications Flow rate: 0.2 to 40 GPM Recommended pressure range: 20 to 150 PSI Temperature rating: 150° F Warranty period: 2 years Solenoid Specifications 24 VAC solenoid 350 mA inrush, 190 mA holding, 60 cycles 370 mA inrush, 210 mA holding, 50 cycles Downloads PGV Instruction Guide PGV Brochure PGV Spec Sheet Hunter Valve Support