Audio-Technica ATW-1312 System 10 PRO Digital Wireless System

Get A Digital, Rackmounted Wireless System For Any Occasion With The Audio-Technica ATW-1312 System 10 PRO Digital Wireless SystemATW-RC13 Rack-mount receiver chassis, ATW-RU13x2 receiver unit, ATW-T1002 handheld dynamic unidirectional microphone/transmitter and ATW-T1001 body-pack transmitter.Audio-Technica's System 10 PRO Rack-Mount digital wireless system provides the same interference-free operation in the 2.4 GHz range (outside TV bands) as the original System 10 wireless system but with expanded features and versatility. The durable half-rack chassis is equipped to house two receiver units that can be operated locally or released from the chassis and mounted remotely (up to 328 feet away) via Ethernet cable. Up to five chassis (10 receiver units) can be linked using the RJ12 cable included with each system, creating a stable, multichannel system with the simultaneous use of up to 10 channels. Like all the products in the System 10 wireless family, the PRO Rack-Mount features 24-bit operation, easy setup, clear, natural sound quality, and three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multi-path interference. Space Diversity uses two antennas on each transmitter and receiver unit to maximize signal integrity. Each System 10 PRO Rack-Mount system includes an ATW-RC13 receiver chassis with rack-mount adapters, one or two ATW-RU13 receiver units with corresponding AT8690 receiver unit mounting brackets, a joining plate (for dual-channel systems only), one RJ12 cable, one AC adapter, and one or two transmitters. Transmitter options include the ATW-T1001 UniPak body-pack transmitter, ATW-T1002 handheld transmitter, ATW-T1006 boundary microphone/transmitter and the ATW-T1007 microphone desk stand transmitter. Both the receiver chassis and transmitters feature easy-to-read displays.  Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance Operates in the 2.4 GHz range - completely free from TV interference Receiver units can be docked in the chassis or mounted remotely (up to 328 feet away) via Ethernet cable for added versatility Up to five chassis (ten receiver units) can be linked and used simultaneously Each receiver unit can be paired with up to 10 transmitters, allowing users to instantly switch between different transmitter configurations Chassis' System ID Display shows RF signal level, system ID, transmitter battery level, and system link status Automatic frequency selection for seamless, interference-free operation Extremely easy operation with instantaneous channel selection, sync, and setup Three levels of diversity assurance: frequency, time & space Ground-lift switch helps eliminate audible hum caused by ground loops SPECIFICATIONSGeneral Operating Frequencies: 2.4 GHz ISM band (2400 to 2483.5 MHz) Dynamic Range: >109 dB (A-weighted), typical Total Harmonic Distortion: <0.05% typical Operating Range: 60 m (200') Open range env. with no interfering signals Operating Temperature Range: 0 degrees C to +40 degrees C (32 degrees F to 104 degrees F) Battery performance may be reduced at very low temperatures Frequency Response: 20 Hz to 20 kHz  Receiver  Receiving System: Diversity (frequency/time/space) Output Connectors: Remote Receiver Connector: RJ45  Link Connector: RJ12 Maximum Output Level: XLR, balanced: 0 dBV 1/4 inch (6.3 mm), unbalanced: +6 dBV Power Supply: 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external Accessory Included: Power supply Accessories Included: AC adapter, Link cable, Rack-mount adapters, Joining plate, Rubber feet Body Pack Transmitter RF Power Output: 10 mW Spurious Emissions: Following federal and national regulations Input Connections: Four-pin Locking Connector Pin 1: GND Pin 2: INST INPUT Pin 3: MIC INPUT Pin 4: DC BIAS +9V Batteries: Two 1.5V AA  (not included) Battery Life: >7 hours (alkaline)  Handheld Transmitter RF Power Output: 10 mW Spurious Emissions: Following federal and national regulations Batteries: Two 1.5V AA not included Battery Life: >7 hours (alkaline) depending on battery type and use pattern Dimensions: 254.8 mm (10.03 inch) long, 50.0 mm (1.97 inch) diameter Net Weight: 280 grams (9.9 oz) without batteries Accessory Included: AT8456a Quiet-Flex stand clamp Manufacturer: Audio-TechnicaModel: ATW-1312SKU: I353873-N-0-WHXBEAN: 4961310130091We are Chuck Levin's Washington Music CenterMaryland, Virginia, and Washington DC's legendary music shop. Family-owned and operated since 1958. Buy gear the way it was meant to be bought, from a store that's been there through it all and has the vibe to prove it. We're staffed with musicians and industry experts, people that live and breathe music gear. Our mission is to help you find the right gear for your project, that thing that will bring you the most joy out of what you do. We're an authorized dealer for almost every brand, we stock items the other stores don't, so you can try before you buy. Stop by our Wheaton, MD showroom and see for yourself.Contact us if you have questions about one of our listings or if you need help finding the right piece of gear.