Shure Microflex Advance 4-Channel Dante Mic/Line Audio Network Interface Unit - Block Inputs

Bring More Clarity to the Conference - The Shure Microflex Advance 4-Channel Dante Mic/Line Audio Network Interface Unit - Block Inputs High-quality sound can bring more clarity to the conference, but not without high quality conversion. ANI interfaces with Dante™ make it easy to connect analog microphones to the network. Paired with analog microphones, ANI keeps the conversation on track. Single Ethernet port carries Dante audio, power (PoE – class 0) LEDs indicate device status and audio signal Control strings for third-party preset controllers including Crestron® and AMX® 4 Band C/S PEQ on every channel Provides channel summing to combine input signals and send them over a single Dante™ channel Browser-based software control for all device parameters, per input channel: Preamp gain Mute control Digital gain Polarity control Phantom power 1/3 Rack unit wide Chassis ground screw (BLOCK version only) provides common chassis ground for multiple inputs Available in block connector (audio + logic) and standard XLR variations SPECIFICATIONS ANI4IN-XLR: (4) XLR connector ANI4IN-BLOCK: (4) 6-pin block connector Phantom Power: selectable per channel, +48 V Logic Connections (Block connectors only): Sent as Ethernet command strings, LED(+5 V), Switch Polarity: Non-inverting, any input to any output Output: (1) RJ45 Power Requirements: Power over Ethernet (PoE), Class 0 Power Consumption: 10W, maximum Weight: 672 g (1.5 lbs) Dimensions (H x W x D): 4 x 14 x 12.8 cm (1.6 x 5.5 x 5.0 in.) Control Application: HTML5 Browser-based Operating Temperature Range: −6.7°C (20°F) to 40°C (104°F) Storage Temperature Range: −29°C (-20°F) to 74°C (165°F) Audio Frequency Response: 20 to 20,000 Hz Dante Digital Output: Channel Count: 4 Sampling Rate: 48 kHz Bit Depth: 24 Latency (does not include Dante latency): 0.35 ms Analog Gain Range: Adjustable in 3 dB steps, 51 dB Dynamic Range (Analog-to-Dante): 20 Hz to 20 kHz, A-weighted, typical, 113 dB Equivalent Input Noise: 20 Hz to 20 kHz, A-weighted, input terminated with 150Ω Analog Gain Setting= +0 dB: -93 dBV Analog Gain Setting= +27 dB: -119 dBV Analog Gain Setting= +51 dB: -130 dBV Total Harmonic Distortion: @ 1 kHz, 0 dBV Input, 0 dB analog gain,Greater than 0.05% Common Mode Rejection Ratio: 150Ω balanced source @ 1 kHz, Less than 70 dB Impedance: 5 kΩ Input Configuration: Active Balanced Input Clipping Level: Analog Gain Setting= +0 dB: +20 dBV Analog Gain Setting= +27 dB: -7 dBV Analog Gain Setting= +51 dB: -31 dBV Built-in Digital Signal Processing: Per Channel: Equalizer (4-band Parametric), Mute, Gain (140 dB range) System: Audio Summing Manufacturer: ShureModel: ANI4IN-BLOCKSKU: I404716-N-25-WHXDUPC: 042406475440We are Chuck Levin's Washington Music CenterMaryland, Virginia, and Washington DC's legendary music shop. Family-owned and operated since 1958. Buy gear the way it was meant to be bought, from a store that's been there through it all and has the vibe to prove it. We're staffed with musicians and industry experts, people that live and breathe music gear. Our mission is to help you find the right gear for your project, that thing that will bring you the most joy out of what you do. We're an authorized dealer for almost every brand, we stock items the other stores don't, so you can try before you buy. Stop by our Wheaton, MD showroom and see for yourself.Contact us if you have questions about one of our listings or if you need help finding the right piece of gear.