Nighthawk Multi-Gig Speed Cbl (Netgear CM1200)

  Integrated Wifi: NO Modem Information DOCSIS 3.1 Cable Modem 32x8 channel bonding Highest Service Level Gigablast  After the cable modem successfully registers on the network, the Power, Upstream, Downstream, and Internet indicators illuminate continuously to indicate that the modem is online and fully operational. For more details, refer to the Modem Lights section. The Netgear CM1200 has the following ports available on the back of the modem. Reset Button - Use this button in the unlikely event that you want to restore the default factory settings. This button is recessed to prevent accidental resets of your modem. LAN Gigabit Ethernet Ports - Provides internet access to a single device. Only one port is active at a time. Cable / Internet Coaxial Cable Connector - Connect your coaxial cable line to this port. Power On / Off Button Power Adapter Input - Connect the supplied power cord to this port.  MAC addresses are written as a unique set of 12 characters containing both letters and numbers (0-9, A-F). The first six characters of the MAC address are unique to the manufacturer of the device. Modem LightsThe modem lights indicate the current status of your cable modem. To troubleshoot any connection problems, use the table below. Modem Light Status Problem Power Off No power. Verify all cable connections and try resetting the modem. If the cable is OK and modem reset does not work, contact Customer Support. Green None - Power is supplied to the cable modem. Red The cable modem is too warm and might overheat: Disconnect the power adapter. Wait a couple of minutes to let the cable modem cool down. Make sure that the cable modem is placed in a vertical position. Make sure that the cable modem is placed in a location with good ventilation. Reconnect the power adapter. Downstream Solid Amber None. Connection established on one channel. Blinking Green Scanning for additional downstream channels. Solid Green None. Operating on more than one channel. Off Downstream channel inactive. Verify all cable connections and try resetting the modem. If the cable is OK and modem reset does not work, contact Customer Support. Upstream Off Upstream channel inactive. Verify all cable connections and try resetting the modem. If the cable is OK and modem reset does not work, contact Customer Support. Blinking Green Scanning for additional upstream channels. Solid Amber None. Connection established on one channel. Solid Green None. Operating on more than one channel. Internet Off Modem offline. Verify all cable connections and try resetting the modem. If the cable is OK and modem reset does not work, contact Customer Support. Blinking Green None. Scanning for configuration parameters. Verify all cable connections and try resetting the modem. If the cable is OK and modem reset does not work, contact Customer Support. Solid Green None. Operational. LAN 1-4 Off A device is not connected to the Ethernet port on the back. Connect a device to the Ethernet port on the back. Blinking Green or Amber None. An Ethernet port is transmitting or receiving data. Solid Amber None. A device is connected to the Ethernet port at 10/100 Mbps. Solid Green None. A device is connected to the Ethernet port at 1,000 Mbps. Manufacturer ResourcesFor more detailed technical information on the CAX80, refer to the following resources. Netgear CM1200 Quick Start (PDF) Netgear CM1200 Use Manual (PDF) Nighthawk Multi-Gig Speed Cable Modem by NETGEAR supports link aggregation to deliver true multi-gig internet speeds. It improves your internet connections and provides smooth online streaming and gaming. This DOCSIS 3.1 cable modem is ready for today?s service plans and future upgrades for XFINITY from Comcast, Spectrum & Cox.