256GB SATA III 6Gb/s 3D TLC NAND mSATA Solid State Drive

Description: • 3D NAND Flash Technology • Global Wear Leveling and Early weak block retirement • TRIM, NCQ, DEVSLP, ATA Security Feature Set supported • Lifetime Enhancements -Direct-to-TLC and SLC Cache enhancement to ensure the optimized WAF -Block/Page RAID function to ensure data recovery - StaticDataRefresh to keep data integrity • Reliable Industrial grade integrated Active PMU and complete protection design with OVP, OCP, Surge rejection and Short protection • External DRAM to achieve the optimal sustained read/write performance (R/S series) • Power shielding firmware architecture to ensure power failure resilience • Warranty: 3 years and within TBW Specifications:• Form Factor: mSATA Solid State Drive (51 mm x 30 mm x 3.5 mm)• Compliance: SATA Revision 3.1 - 6 Gbit/s (3 Gbit/s and 1.5 Gbit/s backward compatible) • Command Sets: Supports ATA/ATAPI-8 and ACS-2 • Performance: - Sequential Read/Write (max. ): 350/165 MB/s - Random 4K Read/Write (IOPS max.): 25000/18000 • Operating Temperature Range: 0 °C to 70 °C • Storage Temperature Range: -55 °C to 95 °C • Operating Voltage: 3.3 V ± 10%• Power Consumption (max.) - Read (active) : 445mA - Write (active): 405mA - Stand-by: 160mA • Data Retention @40 °C: 10 Years @ Life Begin; 1 Year @ Life End • Endurance in Tera Bytes Written (TBW) : 93 TB *TBW is estimated by formula TBW= (Capacity x PE Cycles)/ (WAF x2). Assumption of guard band for the wear leveling is 2. • Mechanical (IEC-60068) - Vibration: 15G, 10 ~ 2001Hz - Drop: 76cm - Shock: 1,500G@0.6ms • LDPC ECC with up to 120 bit correction per 1 KByte page to ensure reliable 3K PE cycles• Mean Time Between Failure: > 2,000,000 hours• Data Reliability: Non-recover Read (UBER) ≤10 -16 • Serious quality control and assurance - 100% NAND Flash screening. - High endurance product design with SLC and pSLC product offerings. - Implement high/low temperature dynamic burn-in in each lot production to monitor production quality to meet design specification. - Reliability criteria compliant with international standards IEC-60068/61000.