Vertical stick extension bracket for trucks w/ body lift

Trucks with body lifts need the shifter stick to be elevated to restore knob location to a comfortable position. Sometimes this can be achieved by swapping out the stick or stub normally included in a shifter kit for a taller version, but in many situations a taller stick of the same shape is not available - necessitating a custom extension bracket like you see here: Select from 1.8" or 3.5" elevation * as bracket lengthens lever, shifter travel at knob will increase... Made of 5/16" thick mild steel, zinc-plated Lower holes are clearanced for 3/8" bolts Upper holes have 3/8"-24 thread to mount stick Bolts for upper holes included (reuse existing bolts in lower holes) Smooth on both sides (no stick serrations) Mate smooth side of Hurst stick to bracket face Mate bracket to smooth side of stub where possible - usually requires flipping stub 180 deg in housing to get smooth faces of stick and stub on same side Warning - some stubs do NOT have a smooth side Apply RTV silicone sea