Kingston Memory KSM26ED8-32HC 32GB 2666MHz DDR4 ECC CL19 DIMM 2Rx8 Hynix C

Kingston Memory KSM26ED8/32HC 32GB 2666MHz DDR4 ECC CL19 DIMM 2Rx8 Hynix C KSM26ED8/32HC32GB 2Rx8 4G x 72-Bit PC4-2666CL19 288-Pin DIMMDESCRIPTIONKingston's KSM26ED8/32HC is a 4G x 72-bit (32GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 2Rx8, ECC, memory module, based on eighteen 2G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows: FEATURES• Power Supply: VDD = 1.2V Typical• VDDQ = 1.2V Typical• VPP = 2.5V Typical• VDDSPD = 2.2V to 3.6V• Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals• Data transfer rates: PC4-2666, PC4-2400, PC4-2133, PC4-1866, PC4-1600• Low-power auto self-refresh (LPASR)• Data bus inversion (DBI) for data bus• On-die VREFDQ generation and calibration• Dual-rank• On-board I2 serial presence-detect (SPD) EEPROM• Temperature sensor with integrated SPD• 16 internal banks; 4 groups of 4 banks each• Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)• Selectable BC4 or BL8 on-the-fly (OTF)• Fly-by topology• Terminated control command and address bus• PCB: Height 1.23” (31.25mm)• RoHS Compliant and Halogen-Free CL(IDD) 19 cyclesRow Cycle Time (tRCmin) 45.75ns(min.)Refresh to Active/Refresh Command Time (tRFCmin) 350ns(min.)Row Active Time (tRASmin) 32ns(min.)Maximum Operating PowerUL Rating94 V - 0Operating Temperature0o C to +85o CStorage Temperature-55o C to +100o CItem Dimension (L"xW"xH")1 x 2 x 7 Weight1 lb Warranty Information Lifetime