Allen & Heath AH-DLIVE-DX32 dLive DX32 Modular Expander

The ideal addition to any installed sound system, the dLive DX32 Modular Expander from Allen & Heath adds remote, modular I/O to a dLive, AHM-64, Avantis, or SQ system, giving you easy scalability to expand your connectivity to fit the size of the venue. The DX32 provides 4x8 channel slots for customizable inputs and outputs for any combination of analog or digital equipment. The DX32 carries up to 32x32 channels of uncompressed audio (at 96kHz) and control data. It also features automatic firmware updates when the system powers up, making corrections to firmware mismatches if they are detected—and thus making your job that much easier. Features  4x 8ch modular design Redundant, hot swappable power supply Dual redundant Cat5 link to Surface or MixRack Rack-mounted or shelf / floor operation Specs Inputs Mic/Line XLR Inputs: Balanced XLR, +48V phantom power Mic/Line Preamp: Fully recallable Input Sensitivity: -60 to +15dBu Analogue Gain: +5 to +60dB, 1dB steps Pad: -20dB Active PAD Maximum Input Level: +30dBu (PAD in) Input Impedance: >4kΩ (Pad out), >10kΩ (Pad in) Mic EIN: -127dB with 150Ω source Phantom Power Indication: Per socket, internal or external phantom power sensing, triggered at 24V Outputs Analogue XLR Outputs: Balanced, Relay protected Output Impedance: <75Ω Nominal Output: +4dBu = 0dB meter reading Maximum Output Level: +22dBu Residual Output Noise: -92dBu (muted, 20-20kHz) 90dBu (muted, 20-40kHz) System Sampling Rate ADC: 24-bit Delta-Sigma DAC: 24-bit Delta-Sigma Latency: + 8 samples, DX32 to Mixrack (DX hop) System Latency: 0.7 ms (MixRack XLR in to XLR out, Input to Mix) + 5 samples, Surface to Mixrack (GigaACE hop) Power Mains Voltage Operating Range: 100-240V AC, 50/60Hz Mains Power Consumption 300W max (MPS16 V1 300W)* 250W max (MPS16 V2 250W)* *MPS16 power consumption is printed under AC inlet Operating Operating Temperature Range Fitted with: MPS16 V1 300w 0°C to 35°C (32°F to 95°F) MPS16 V2 250w 0°C to 40°C (32°F to 104°F)