Crestron CRESNET-P-TL-SP1000 Cresnet® Control Cable, Plenum-Rated, 1000 ft

Crestron® certified for use in the wiring of a Cresnet® control network. Provides (1) 22 AWG shielded twisted pair for Cresnet control data, and (1) 18 AWG pair for 24VDC and Ground, within a single plenum-rated jacket. The Cresnet® bus is the communications backbone for many Crestron® keypads, lighting controllers, shade motors, sensors, and other devices. Cresnet is a simple, yet flexible 4-wire network that provides bidirectional communication and 24VDC power for Cresnet devices. Cresnet allows for both homerun and daisy-chain wiring topologies, with cable lengths up to approximately 3000 feet (915 meters) per run. Within a single plenum-rated polymer jacket, CRESNET-P contains (1) 18 AWG pair for 24VDC and Ground, and (1) 22 AWG shielded twisted pair for control data. CRESNET-P is available in three colors: teal, orange, or black. Specifications Data Pair   Colors Blue/white   Conductors (2) 22 AWG (0.33 mm²) stranded bare copper, twisted   Insulation Foam FEP   Shield Aluminum/Polyester (100% coverage)   Drain (1) 24 AWG (0.20 mm²) stranded tinned copper   Capacitance 12.5 pF/ft (41 pF/m), nominal   Impedance 100 Ohms, nominal Power Pair   Colors Red/black   Conductors (2) 18 AWG (0.82 mm²) stranded bare copper   Insulation Plenum polymer   Shield none Outer Jacket   Material Plenum polymer   Thickness 0.015 inch (0.381 mm) nominal   Outer Diameter 0.216 inch (5.487 mm) nominal   Color Options Teal w/yellow stripe, orange w/black stripe, or black w/yellow stripe Compliance   NEC Article 800; UL Subject 444, Type CMP; CSA Type CMP; NFPA 262; CSA FT6 (Steiner Tunnel test); RoHS