Tascam CD-200BT CD Player/Bluetooth Receiver

Play High Quality Audio Sources Easily Using Bluetooth® Wireless Playback of a Variety of Audio File Formats from Devices that Support Bluetooth® Through the antenna located in the front of the CD-200BT, audio file playback signals can be received from a variety of Bluetooth® compatible devices. The types of files that can be played back depend on the transmitting device; so any file type that can be played back by iTunes, Windows Media Player, smartphone player apps and other music applications can be played through this unit. Bluetooth® playback uses a wireless connection, so no new wiring is necessary to use compatible audio sources as long as they are in signal-range, allowing easy and speedy playback. Device Selection Function Allows Transmission Devices to Be Registered in Advance for Quick Switching and Operation Bluetooth® playback requires pairing. Normally, pairing is one to one, but the CD-200BT has a device selection function that can be used to pair with multiple transmitting devices. By registering devices to be used in advance, you can switch smoothly between transmission devices for playback with minimal connection interruption time. (Only one device can be used for playback at a time) In addition, since the name of the transmission device currently being used for audio playback can be shown on the display, you can check the connection status within this unit. Wireless Playback with High Quality Audio A variety of different profiles are used for Bluetooth® transmission depending on the application. The CD-200BT supports the A2DP (Advanced Audio Distribution Profile) for high audio quality music playback, and SBC (Sub Band Codec), a standard A2DP codec. In addition, it supports the aptX® codec, making high quality wireless audio playback possible. The aptX® codec also has an error recovery function, so audio is much less likely to be interrupted, compared to ordinary SBC transmission. Other Features High-Quality CD Drive Designed and Built by TEAC All models in the CD-200 series have the same highly-regarded and reliable TEAC designed CD drive. By undertaking development ourselves and including our drives in the player, we have achieved higher dependability, quality and reputation. Supports for Numerous Audio Formats The CD-200BT is perfect for any install scenario where audio format versatility is needed. 10-Second Shockproof Memory Prevents Skipping from Vibrations and Other Causes The 10-second shockproof memory prevents skipping from vibration and other causes. Data stored in the player's memory can be played back without skipping, preventing undesired interruptions. More from the Manufacturer PRODUCT HIGHLIGHTS Disc Capacity: 1 Media Type Supported: CD-RW Formats Supported: CD-DA Formats Supported: WAV Formats Supported: MP3 Formats Supported: MP2 Formats Supported: CD-Text Headphone: Yes Auxiliary Input: Yes Input Voltage: 120 V AC Form Factor: Rack-mountable Height: 3.7" Width: 18.9" Depth: 11.7" Weight (Approximate): 9.90 lb Environmentally Friendly: Yes Environmental Certification: RoHS Environmental Certification: WEEE Country of Origin: China Specifications Playback media CD, CD-ROM, CD-R, CD-RW (12cm / 8cm) Playback format   CD-DA Stereo, 44.1kHz, 16-bit WAV Stereo, 8k / 11.025k / 12k / 16k / 24k / 32k / 44.1k / 48k Hz, 8/16-bit MP2 Stereo, 32k / 44.1k / 48k Hz, 32k to 384k bps MP3 MPEG1 Audio Layer III, 32k / 44.1k / 48k Hz, 32k to 320k bps, VBR Pitch control ±14% Analog audio input   AUX   Connector 1/8" (3.5mm) Stereo mini jack × 1 Input impedance 22kΩ Nominal input level –20dBV Maximum input level –4dBV Analog audio output   UNBALANCED   Connector RCA Pin jack × 1 pair Output impedance 200Ω Nominal output level –10dBV (0.32Vms) Maximum output level +6dBV (2.0Vms) Digital audio output   COAXIAL   Connector RCA Pin jack × 1 Output impedance 75Ω Format IEC60958-3 (S/PDIF) OPTICAL   Connector TOS (JEITA RC-5720C) × 1 Format IEC60958-3 (S/PDIF) Headphone out   Connector 1/4" (6.3mm) Stereo phone jack × 1 Maximum output level 20mW + 20mW or more (THD+N 0.1% or less, into 32Ω loaded) Power AC120V, 60Hz Power consumption 15W Dimensions (W×H×D) 18.9" × 3.7" × 11.7" / 481 × 94.5 × 298 mm Weight 11.5 lbs. / 5.2 kg Operating temperature 41˚F to 95˚F / 5 ˚C to 35˚C Inclination of installation 5˚ or less Backup Memory Items Elapse time / Title display setting (CD), Playback mode (CD), Program (when loaded), Current folder (when CD loaded), Current source, Repeat playback function setting (ON/OFF), Pitch control (ON/OFF, CD) Pitch control value (CD) Standard accessories Wireless remote controller (RC-CD200iL), AA battery × 2, Rack mounting screw, Warranty card, Owner's manual   Audio performance Frequency response 20Hz to 20kHz, ±1dB (playback, JEITA) Distortion 0.01% or less (during playback, JEITA) S/N ratio 90dB or more (playback, JEITA) Dynamic range 90dB or more (playback, JEITA) Channel separation 90dB or more (playback, JEITA)