4002 - Lug Nut Remover - 15/16" - 17mm - 21.5mm

Features patented reverse tapered thread to remove stripped lug nuts or lug nuts with missing keys Fits lug nuts measuring 15/16" "point-to-point" Heavy duty threads make these sockets reusable Use with 1/2" drive impact wrench Fits: 17mm, 19mm & 21mm Lugs Also available in CTA #4001 5 Pc. Emergency Lug Nut Remover set DO NOT USE on lug nuts/bolts with spinning cap/ring Instructions NOTE: Maximum recommended air pressure is 90 psi Install 15/16" socket on impact wrench and switch wrench valve to the "unscrew" position. Hold wrench/socket square to lug nut, then turn socket counter-clockwise by hand until it "bites" the lug nut. Operate the impact wrench until the socket is driven on and the lug nut is removed. To remove a lug nut that is stuck inside the socket, grind flats on opposite sides of the exposed portion of the nut, then clamp them securely in a vise. Reverse the direction of the impact wrench and operate until the nut is extracted. Attention: It is NOT recommended