16x18 Water to Air Heat Exchanger~1

16x18 / 115,200 BTUs / 100 PSI For use in your hot air furnace plenum. ***Not recommended for air compressors*** Information about our heat exchangers This heat exchanger is ideal for a 16x 19 plenum or larger. The outlets come out on the 16 side (shown as the vertical side in the picture above) The fin area is 16x 18 GPM 12 CFM 1405 Outside Dimensions 16(width)x21.5(Length from Manifold to Base)x3.5(Thickness) There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer. All exchangers are 3 1/2 thick. Aluminum fins are installed at 12 fines per inch. All exchangers are triple pass design. Tubing is 1/4 copper. All our exchangers include the flat front face mounting for easier installation and increased plenum strength. Our exchangers have 1 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbites. Exchangers will work with chilled water also. Installation brackets,