PACLink Adapter - for DIY Xbox 360 & PS3 Control Box

The PACLink Adapter can be used in conjunction with the I-PAC2 to build a DIY control box that is compatible with Xbox 360 and PS3. Features Operates in either Xinput/Xbox 360 mode or PS3 mode. Switchable on the adaptor Uses a high-speed interface from the I-PAC. No lag Works on the Xbox 360 without the need for a wired controller to be cross-plugged unlike many other adaptors Operates in 4 control modes which can be switched on the fly from the control panel One I-PAC 2 board supports one or two adaptors Installation The I-PAC 2 board needs to be connected to a PC and the WinIPACV2 program run, and select the "config" tab, then check the "Enable Expansion Interface" check box and click "apply". Connect the adaptor(s) as shown in the picture below. The wire colors RED and BLACK are marked on the board on the P1 side. The P2 side connects the same way. Connect the USB cables to the console (or PC for Xinput Mode). Note you can connect the board to a console AND to a PC using its stan