Diatone Mamba MK4 F722 APP F65_128K ESC Flight Controller Stack (MPU6000)

Diatone's Mamba MK4 (fourth generation) stack is a redesign of its already fantastic line of flight controllers and ESCs.  Improvements include making the products easier to use by increasing soldering pad sizes by 30%, pad spacing by 100%, adding USB-C, additional UARTS and I2C, better filtered BEC, ESC support for 128K PWM, WiFi config through the Speedy Bee App, and more.  What's New? A completely different pad style has been redesigned to increase pad area by 30% and pad spacing by 100%, reducing solder errors and associated failures. The pad area increased by 30% Pad spacing increased by 100% MP9943 synchronous rectifier BEC USB Type C 6 Set UART and I2C 4 Set Power Protection 32Bit ESC all support 128K Upgrade the twisted pair anti-jamming cable and reinforcement process Specifications: F722 APP FLIGHT CONTROLLER MCU:  STM32F722 Frequency:  216MHz Gyro:  MPU6000 Barometer:  SPL06 OSD:  AT 7456E Blackbox:  16M Memory UARTS:  6 Sets I2C:  Yes F.Port:  Yes Buzzer:  Yes Current:  Yes ESC Signal:  8 Sets BEC 3.3V:  0.5A BEC 5V:  3A BEC 9V:  3A MB LED:  Yes BF LED:  Yes Air Unit Port:  Yes WiFi:  Yes - Compatible with Speedy Bee App VTX Switch:  Yes BEC Protection:  Yes Receiver Protection:  Yes TVS Protection:  Yes Input:  6S LiPo Firmware:  Betaflight Mounting:  30.5x30.5mm/M3 Size:  38.0x40.5x8mm Weight:  10g F65_128K ESC Input Voltage:  3~6S LiPo (12.6V~25.2V) Continuous Current:  65A Burst Current:  75A BEC:  No Target:  BLHeli_32 MAMBA F65_128K Soft:  DShot300/600/1200 PWM:  24~128K TVS Protection:  Yes Mounting:  30.5x30.5mm/M3 Includes:1x Diatone Mamba MK4 F722 APP Flight Controller MPU60001x Diatone Mamba F65_128K BL32 4-In-1 65A ESC5x M3 Silicone Grommets5x M3 ESC Isolation Columns1x 8 Pin single-ended cable for flight controller2x 8 Pin Cable1x 6 Pin Air Unit Cable1x XT601x Capacitor Download Wiring Diagram