EnGenius Network ECB600 Wireless N 300M+300M Dual Band 802.11 Access Point

EnGenius Network ECB600 Wireless N 300M+300M Dual Band 802.11 Access Point

$214.80
{{option.name}}: {{selected_options[option.position]}}
{{value_obj.value}}

HardwareRF: 2.4 and 5 GHz Frequency BandsStandard: IEEE 802.11a/b/g/nRadio I: 11b/g/n: 2.4122.484 GHzRadio II: 11a/n: 5.18-5.24 and 5.26-5.32 and 5.5-5.7 and 5.745-5.825 GHzData Rate: Up to 300 Mbps in both frequency bandsMemory: 64MBFlash Memory: 8MBAntenna Four (4) External 5 dBi Omni-Directional Antennas Physical Interface 1 x RJ-45 Gigabit Ethernet (10/100/1000 Mbps) 1 x Reset Button Power JackPower Requirements Power Supply: 90 to 240 VDC +/- 10%, 50/60 Hz (depends on different countries) Active Ethernet (Power-over-Ethernet, IEEE 802.3at/af) Power Adapter (United States) 48VDC/0.375A Device: 12V/2AModulations OFDM: BPSK, QPSK, 26-OAM, 64-QAM, DBPSK, DQPSK, CCK Operating Channels 2.4 GHz: US/Canada 1-11 5 GHz: Country dependent for the following ranges: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165Software Topology Infrastructure/Ad-Hoc Operation Modes Access Point, WDS Bridge, WDS Access Point, Universal Repeater Multiple BSSID Supports up to 8 BSSIDs per radioLAN IP (check validity and DHCP server IP range) MAC SSID-to-VLAN Tagging Supports 802.1q SSID-to-VLAN tagging Spanning Tree Supports 802.1d Spanning Tree ProtocolWireless Wireless Mode: 11a/11b/11g/11n Channel selection (settings vary by country) Channel bandwidth (Auto, 20 MHz, 40 MHz) Transmission rate: 2.4 GHz: 11n only, 11b/b/n mix, 11b only, 11b/g, 11g only 5 GHz: 11n only, 11a/n mix, 11a onlyQoS WMM (Wireless Multimedia) VPN Pass-through (PPTP, L2TP, IPSec) WPS Software onlyManagement Tx Power Control: Adjust transmit power by dBm Configuration: Web-based configuration (http)/Telnet Telnet Server: CLIFirmware Upgrade: Via web browser, settings are reserved after upgrade Administrator Setting: Administrator Username and Password Change Reset Setting: Reboot (press 1 second). Reset to factory default (press 10 seconds)System Monitoring: Status Statistic and Event Log SNMP: V1, V2c, V3 MIB: MIB I, MIB II (RFC1213) and private MIBTraffic Shaping: Incoming and outgoing wireless traffic shaping Auto-channel Selection: Automatically selecting least congested channel Bandwidth Measurement: IP range and bandwidth managementAuto Reboot: Reboot Access Point by minute, hour, day, or week Backup and Restore: Save and restore settings through Web interface CLI: Supports Command Line Interface Diagnosis: IP pinging statisticsLog: SysLog and Local Log support LED Control: On/Off AP Detection: Scanning for available EnGenius ApsWireless / Network PPPoE: Point-to-Point Protocol over Ethernet in Client Router mode (this function will keep trying when failed or disconnected) PPTP: Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networksWireless Security WPA/WPA2 Personal (WPA-PSK using TKIP or AES) WPA/WPA2 Enterprise (WPA-EAP using TKIP) 802.1X RADIUS Authenticator: MD5/TLS/TTLS, PEAP SSID broadcast enable/disable MAC Address Filtering, Up to 50 field L2 Isolation (Access Point mode) Wireless STA (Client) connected list (Idle/Connection Time, Pkt statistics) QoS (Quality of Service) WMM (Wireless Multimedia) Item Dimension (L"xW"xH"):12.16 x 9.17 x 3Weight:2.5 lbWarranty Information:1 Year

Show More Show Less