Gigabyte Motherboard GA-X99-GAMING 5P Core i7 LGA2011-3 X99 DDR4 SATA PCI-Express EATX

CPU 1.Support for Intel Core i7 processors in the LGA2011-3 package2.L3 cache varies with CPU Chipset 1.Intel X99 Express Chipset Memory 1.8 x DDR4 DIMM sockets supporting up to 128 GB of system memory(Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.) 2.4 channel memory architecture3.Support for DDR4 3333(O.C.) / 3200(O.C.) / 3000(O.C.) / 2800(O.C.) / 2666(O.C.) / 2400(O.C.) / 2133 MHz memory modules4.Support for non-ECC memory modules5.Support for Extreme Memory Profile (XMP) memory modules6.Support for RDIMM 1Rx8/2Rx8/1Rx4/2Rx4 memory modules (operates in non-ECC mode) Audio 1.Creative Sound Core 3D chip2.Support for Sound Blaster Recon3Di3.TI Burr Brown OPA2134 operational amplifier4.High Definition Audio5.2/5.1-channel6.Support for S/PDIF Out LAN 1.Qualcomm Atheros Killer E2201 LAN chip (10/100/1000 Mbit) Expansion Slots 1.2 x PCI Express x16 slots, running at x16 (PCIE_1/PCIE_2) ( For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIE_1 slot if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIE_1 and PCIE_2 slots.)2.2 x PCI Express x16 slots, running at x8 (PCIE_3/PCIE_4) (The PCIE_4 slot shares bandwidth with the PCIE_1 slot. When the PCIE_4 slot is populated, the PCIE_1 slot will operate at up to x8 mode.) (When an i7-5820K CPU is installed, the PCIE_2 slot operates at up to x8 mode and the PCIE_3 operates at up to x4 mode.) (All PCI Express x16 slots conform to PCI Express 3.0 standard.)3.3 x PCI Express x1 slots(The PCI Express x1 slots conform to PCI Express 2.0 standard.) 4.1 x M.2 Socket 1 connector for the wireless communication module (M2_WIFI) Multi-Graphics Technology 1.Support for 4-Way/3-Way/2-Way AMD CrossFire/NVIDIA SLI technology(The 4-Way NVIDIA SLI configuration is not supported when an i7-5820K CPU is installed. To set up a 3-Way SLI configuration, refer to "1-6 Setting up AMD CrossFire/NVIDIA SLI Configuration.") Storage Interface Chipset: 1.1 x M.2 PCIe connector(Socket 3, M key, type 2242/2260/2280 SATA and PCIe x2/x1 SSD support) 2.1 x SATA Express connector3.6 x SATA 6Gb/s connectors (SATA3 0-5) 4.Support for RAID 0, RAID 1, RAID 5, and RAID 10(Only AHCI mode is supported when an M.2 PCIe SSD or a SATA Express device is installed.) (M2_10G, SATA Express, and SATA3 4/5 connectors can only be used one at a time. The SATA3 4/5 connectors will become unavailable when an M.2 SSD is installed in the M2_10G connector.)Chipset: 1.4 x SATA 6Gb/s connectors (sSATA3 0-3), supporting IDE and AHCI modes only (An operating system installed on the SATA3 0-5 connectors cannot be used on the sSATA3 0-3 connectors.) USB Chipset: 1.4 x USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header) 2.8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)Chipset + Renesas uPD720210 USB 3.0 Hub: 1.4 x USB 3.0/2.0 ports on the back panel Internal I/O Connectors 1.1 x 24-pin ATX main power connector2.1 x 8-pin ATX 12V power connector3.1 x PCIe power connector4.1 x I/O shield audio LED power connector5.1 x heatsink LED power connector6.1 x M.2 Socket 3 connector7.1 x SATA Express connector8.10 x SATA 6Gb/s connectors9.1 x CPU fan header10.1 x water cooling fan header (CPU_OPT)11.3 x system fan headers12.1 x front panel header13.1 x front panel audio header14.1 x USB 3.0/2.0 header15.2 x USB 2.0/1.1 headers16.1 x Thunderbolt add-in card connector17.1 x Clear CMOS jumper18.1 x CPU mode switch19.1 x audio gain control switch Back Panel Connectors 1.1 x PS/2 keyboard port2.1 x PS/2 mouse port3.6 x USB 3.0/2.0 ports4.4 x USB 2.0/1.1 ports5.1 x optical S/PDIF Out connector6.1 x RJ-45 port7.5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In/Mic In, Line Out, Headphone) 8.2 x Wi-Fi antenna connector holes I/O Controller 1.iTE I/O Controller Chip H/W Monitoring 1.System voltage detection2.CPU/System/Chipset temperature detection3.CPU/CPU OPT/System fan speed detection4.CPU/System/Chipset overheating warning5.CPU/CPU OPT/System fan fail warning6.CPU/CPU OPT/System fan speed control Whether the fan speed control function is supported will depend on the cooler you install. BIOS 1.2 x 128 Mbit flash2.Use of licensed AMI UEFI BIOS3.Support for DualBIOS4.Support for Q-Flash Plus5.PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 Operating System 1.Support for Windows 8.1/8/7 Form Factor 1.E-ATX Form Factor 30.5cm x 26.4cm Item Dimension (L"xW"xH"): 14 x 12 x 4Weight:5.56 lbWarranty Information: 3 years