Supermicro Motherboard MBD-X10SLH-F-O Xeon E3-1200L GA1150 C226 DDR3 1600 SATA PCI Express USB microATX
Processor/Cache:CPU:- Intel Xeon Processor E3-1200 and v3 (Supports VHD via E3-1285 or E3-1285L) and 4th Gen Core i3, Pentium, Celeron ProcessorSingle Socket H3 (LGA 1150)System Memory:Memory Capacity:- 4 x 240-Pin DDR3 DIMM Sockets- Supports up to 32GB DDR3 ECC/Non-ECC Unbuffered Memory (UDIMM)Memory Type:- 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMsDIMM Sizes:- 8GB, 4GB, 2GB, 1GBMemory Voltage:- 1.5VError Detection:- Correct Single Bit Errors- Detects Double Bit Errors (Using ECC Memory)Onboard Devices:Chipset:- Intel C226 Express PCHSATA:SATA3 (6Gbps) with RAID 0, 1, 5, 10IPMI:Support for Intelligent Platform Management Interface v.2.0IPMI 2.0 with Virtual Media Over LAN and KVM-Over-LAN SupportNetwork Controllers:- Intel i210AT Controllers - Virtual Machine Device Queues High efficient I/O overhead- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output - 1x Realtek RTL8201N PHY (Dedicated IPMI)Input/Output:Serial ATA:- 6x SATA3 (6Gb/s) PortsLAN:2 x Gigabit Ethernet LAN Ports- 1 x RJ45 Dedicated IPMI LAN PortUSB:- 4 x USB 3.0 Ports (2 Rear, 1 Type-A)6 x USB 2.0 Ports (2 Rear, 4 Via Header)VGA:1 x VGA D-SUB ConnectorSerial Port/Header:2 x COM Ports (1 Rear, 1 Header)DOM:SATA DOM (Disk on Module) Power Connector SupportTPM:- 1 x TPM 1.2 20-Pin HeaderExpansion Slots:PCI-Express:- 1x PCI-E 3.0 x8 (in x16) slot - 1x PCI-E 3.0 x8 slot - 1x PCI-E 2.0 x4 (in x8) slotSystem BIOs:BIOs Type:- 128Mb SPI Flash EEPROM with AMI BIOsBIOs Features:- DMI (SMBIOS) 2.7-ACPI 5.0- USB Keyboard SupportManagement:Software:- IPMI (Intelligent Platform Management Interface) v2.0 with KVM support - SuperDoctor III- Watch Dog- NMIPower Configuration:- ACPI/ACPM Power Management- Main Switch Override Mechanism- Power-On Mode for AC Power RecoveryInternal/External Modem Ring-OnPC Health Monitoring:Voltage:- Monitors for CPU Cores, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V Fan:- Total of five 4-pin fan headers supporting up to 5 fans- 5x fans with tachometer status monitoring- Status monitor for speed control- Status monitor for on/off control- Support 3-pin fans (w/o speed control)- Low noise fan speed control- Pulse Width Modulated (PWM) fan connectorsTemperature:- Monitoring for CPU and chassis environment - CPU thermal trip support - FC temperature sensing logic - Thermal Monitor 2 (TM2) support - PECILED:- CPU / System Overheat LED- +5V Standby Alert LEDOther Features:Chassis Intrusion DetectionChassis Intrusion HeaderForm FactoruATXItem Dimension (L"xW"xH")9.6 x 9.6 x 1Weight2.00 lbWarranty Information1 Year