Magnum ME2012 2000W Inverter 12v W-100A Charger 2 20A Brkrs

Reliable Mobile Power from Magnum EnergyThe ME Series Inverter/Charger from Magnum Energy is a new generation inverter designed specifically for rugged mobile applications. The ME Series is powerful, easy-to-use, and best of all, cost effective. Safe and reliable: The ME Series is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01, ensuring that the inverter is safe and reliable. Easy-to-install: Install the ME Series in four easy steps: simply connect the inverter's output to your distribution circuits or electrical panel, connect your shore power cable (AC) to the inverter's easy-to-reach terminal block, connect the batteries, and switch on the power. Features The ME Series Inverter/Charger is loaded with features: Power Factor Corrected (PFC) Charger: The charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger - using only 15 amps per 100 amps versus 23 amps used by standard chargers. Choices: The ME Series comes in three power models, allowing you to choose the model that is right for you. Versatile mounting: Mount the ME Series on a shelf, bulkhead, or even upside down. Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance. Multiple ports: The ME Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port. Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be. Convenient switches: The ME Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator. Expanded transfer relay: 60 Amp transfer service is available on all models. Buy with ease: The ME Series is backed by a three-year (36-month) limited warranty. Accessories and Options* Remote control: For convenient finger-tip operation, including the new one-knob? programming. AGS module: Automatically starts and stops your generator based on temperature or battery voltage. Inverter Specification ME2012 ME2512 ME3112 Input battery voltage range 9 - 16 VDC 9 - 16 VDC 9 - 16 VDC Nominal AC output voltage 120 VAC 120 VAC 120 VAC Output frequency and accuracy 60 hz   0.1Hz 60 hz   0.1Hz 60 hz   0.1Hz 1 msec surge current (amps AC) 60 100 120 100 msec surge current (amps AC) 37 45 50 5 sec surge power (real watts) 3700 5000 6000 30 sec surge power (real watts) 3450 4500 4800 5 minute surge power (real watts) 3100 3500 3950 30 minute surge power (real watts) 2400 2900 3500 Continuous power at 45° C 2000 VA 2500 VA 3100 VA Maximum continuous input current 266 ADC 333 ADC 413 ADC Inverter efficiency (peak) 95% 91% 90% Transfer time 16 msecs 16 msecs 16 msecs Search mode ( Typical) 5 watts 5 watts 5 watts No load ( 120 VAC output ) Typical 20 watts 23 watts 25 watts Wave Form Modified Sine Wave Charger Specifications Continuous output at 45° C 100 ADC 120 ADC 160 ADC Charger efficiency 85% 85% 85% Power factor > .95 > .95 > .95 Input current at rated output (AC amps) 15 18 21 General Features and Capabilities Transfer relay capability 2 legs at 30 A for 120 V/30 A or 240 V/60 A service Five stage charging capability Bulk, Absorb, Float, Equalize, and Battery Saver™ Battery temperature Compensation Yes, 15 foot battery temp sensor standard Internal cooling 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans Overcorrect protection Yes, with two overlapping circuits Conformal coating on PCB's for corrosion protection Yes Over temperature protection Yes, On Transformer, MOSFETS, and battery Stainless steel fasteners for corrosion protection Yes Dual AC branch rated output breakers On the ME2012-20B only - AC breakers in 20 amp ratings Listings ETL Listed to UL/cUL 458, CSA C22.2 #107.1-01 Warranty 3 Years Environmental Specifications Operating temperature -20° C to +60° C (-4° F to 140° F) Nonoperating temperature -40° C to +70° C (-40° F to 158° F) Operating humidity 0 to 95% RH non condensing Physical Specifications Dimensions (h x w x d) 13.75" x 12.65" x 8.0" (34.9 cm x 32.1 cm x 20.3 cm) Mounting Shelf (top or bottom up) or bulkhead (vents up) Max operating altitude 15,000 feet Weight 37 lb 41 lb 46 lb