AUDIENT iD14 AUDIO INTERFACE | B-STOCK

iD14 delivers the audio performance of a large format console in a compact and elegant desktop package. iD14 provides a pair of world-class Audient console mic pres, class-leading Burr Brown converter technology, console style monitor control, JFET D.I and the revolutionary ScrollControl. With its versatile feature set and intuitive layout, iD14 will become the hub of your studio in no time. 10-in/4-out USB Audio Interface 2 x Class-A Audient Console Mic Preamplifiers High Performance Burr Brown AD/DA Converters iD ScrollControl Mode 1 x Discrete JFET Instrument Input Main Speaker Output Independent Class-AB Headphone Output Full Monitor Control Functionality (software controlled) ADAT Input for Expandability Low Latency DSP Mixer USB2.0 Bus Powered 24bit/96khz All-Metal Enclosure Over £500 worth of plugins and software with ARC MICROPHONE PREAMPLIFIER: (measurement includes ADC signal path) MIC GAIN: 0 to 66 dB (inc. +10 dB software boost) LINE GAIN: -10 to 56 dB (-10dB hardwired line pad) PHANTOM POWER: 48V ±4V @ 10mA/Channel (12VDC only)* MIC EIN: <-127.0 dBu CMRR: >80 dB @ 1kHz MAXIMUM INPUT LEVEL: +12 dBu (0 dBFS digital Maximum) INPUT IMPEDANCE (Mic): 2.8 kΩ Balanced INPUT IMPEDANCE (Line): >8kΩ Balanced FREQUENCY RESPONSE: ±0.1 dB 20Hz to 22kHz @ min. gain±1.0 dB 20Hz to 22kHz @ max. gain CROSSTALK: <-90 dBu THD+N @ 0dBu (1kHz): 0.0025% (-92 dBu) SNR: 96 dB un-weighted, 99 dB A-weighted XLR Combi Female Pin 2 (Hot), Pin 3 (Cold) & Pin 1 (Shield) 1/4" TRS Jack Tip (Hot), Ring (Cold) & Sleeve (Shield) D.I (Channel 1): D.I GAIN: 0 to 66 dB (inc. +10 dB software boost) MAXIMUM INPUT LEVEL: +9 dBu (0.6% THD typical) INPUT IMPEDANCE: >500kΩ Unbalanced FREQUENCY RESPONSE: ±0.1 dB 20Hz to 22kHz THD+N @ 0dBu (1kHz): <0.04% all musical 2nd and 3rd harmonics SNR: 95 dB un-weighted, 98 dB A-weighted 1/4” JACK: TIP (Hot) & SLEEVE (Shield) ANALOGUE TO DIGITAL CONVERTER (ADC 1 & 2): (measured sans microphone preamplifier under AES-17) MAXIMUM INPUT LEVEL: +12 dBu (0 dBFS digital maximum) DIGITAL REFERENCE LEVEL: +12 dBu = 0 dBFS FREQUENCY RESPONSE: ±0.1 dB 10Hz to Fs/2 (flat to nyquist) CROSSTALK: -100 dBu @ 1kHz & 10kHz THD+N @ -1dBFS (1kHz): <0.002% (-94 dB) THD+N @ -6dBFS (1kHz): <0.0015% (-97 dB) DYNAMIC RANGE: 113 dB un-weighted116 dB A-weighted DIGITAL TO ANALOGUE CONVERTER (DAC 1&2): (measured under AES-17 at line outputs 1&2) MAXIMUM OUTPUT LEVEL: +12 dBu (0 dBFS digital maximum) DIGITAL REFERENCE LEVEL: +12 dBu = 0 dBFS OUTPUT IMPEDANCE <100Ω FREQUENCY RESPONSE: ±0.1 dB 10Hz to Fs/2 (flat to nyquist) CROSSTALK: <-105 dBu @ 1kHz & 10kHz THD+N @ -1dBFS (1kHz): <0.003% (-90.5 dB) DYNAMIC RANGE: 114 dB un-weighted117 dB A-weighted 1/4" TRS Jack Tip (Hot), Ring (Cold) & Sleeve (Shield) HEADPHONE OUTPUT (DAC 3&4): (measured under AES-17 at phones output) MAXIMUM OUTPUT LEVEL: +12 dBu DIGITAL REFERENCE LEVEL: +12 dBu = 0 dBFS VOLTAGE GAIN: +6 dB (optimised for loudness) OUTPUT IMPEDANCE: <30 Ω Balanced FREQUENCY RESPONSE: ±1.0 dB 10Hz to Fs/2 (load dependant) CROSSTALK: -100 dBu @ 1kHz & 10kHz THD+N @ -1dBFS (1kHz): <0.002% (-94 dB) DYNAMIC RANGE: 108 dB un-weighted111 dB A-weighted MAX LEVEL INTO 30ohms: +4 dBu, 0.005% THD+N, Power: 101mW MAX LEVEL INTO 60ohms: +5 dBu, 0.004% THD+N, Power: 64mW MAX LEVEL INTO 600ohms: +13 dBu, 0.0025% THD+N, Power: 39mW 1/4” JACK: TIP (Left), RING (Right) & SLEEVE (Shield) DIGITAL INPUT: 8-CHANNEL ADAT: 44.1kHz to 48kHz 4-CHANNEL ADAT: 88.2kHz to 96kHz SMUX STEREO S/PDIF / TOSLINK 44.1kHz to 96kHz (Stereo) USB 2.0 HIGH SPEED: BUS POWER: 500mA @5V System Limit425mA @5V Maximum (No 48V)(Phantom power only available on 12VDC)* No. of INPUT CHANNELS: 10 (2 Analogue, 8 Digital) No. of OUTPUT CHANNELS: 4 (4 Analogue) DSP MIXER LATENCY: ROUND TRIP (in-to-out)   44.1kHz 1.660ms48.0kHz 1.531ms88.2kHz 0.844ms96.0kHz 0.771ms POWER SUPPLY: 12VDC Centre Positive - 1.25A (required for full 48V Phantom Power)* * iD14 requires a lot of power for class leading converters and class-A microphone preamplfiers. We could not beat the laws of physics so an external supply is required for 48V phantom power. Your microphones will thank you when they get enough voltage!