Specpoxy 3000 Astm 881 Compliant Hi-Mod, Gel Viscosity Epoxy

SpecPoxy 3000 is a two-component, moisture insensitive, high modulus, structural epoxy bonding gel.  Case comes with a nozzle for easy application. Call for discount on bulk purchases (+1 (800) 342-3876) SpecPoxy 3000 is 100% solids, solvent free, low odor, high-strength, and non-sag. VOC content= 0 grams/liter. Application Anchoring bolts, dowels, and reinforcing steel. Vertical and overhead structural bonding and patching. Sealing cracks and setting injection ports. Suitable for use in concrete, block, brick, or stone. Mixing Instructions Mix equal volumes of Part A and Part B for three minutes using a low-speed drill. Air, material, and surface temperatures must be at least 60°F prior to mixing and installation. Surface Preparation Surfaces must be clean and structurally sound. Remove contaminants by sandblasting, mechanical abrasion, or hydro blasting. Ensure drilled holes are prepared by brushing and blowing out with oil-free compressed air. Application Techniques Bonding: Apply SpecPoxy 3000 neatly into the substrate and ensure the glue line does not exceed 1/8″. Anchoring: For anchoring applications, ensure holes are drilled to the appropriate depth and diameter, and filled from the bottom up to avoid air pockets. Shelf Life Store in original, tightly closed containers. Shelf life is two years from the date of manufacture when stored properly. Test Data Initial Cure: 24 hours Final Cure: 7 days Compressive Strength (ASTM D695): 11,230 psi Compressive Modulus (ASTM D695): 326,500 psi Bond Strength (ASTM 882): 2 days – 2,460 psi; 14 days – 3,280 psi Elongation (ASTM D638): 1.3% Tensile Strength (ASTM D638): 7,210 psi Water Absorption (ASTM D570): <0.5% Heat Deflection (ASTM D648): 133°F Mix Ratio: 1 to 1 Viscosity: Gel/Paste