INJORA Micro Brushless MBL32 ESC for 1/18 1/24 RC Crawler

INJORA Brushless Micro MBL32 ESC for 1/18 1/24 RC Crawler TRX4M Ascent18 SCX24 Only comptible with INJORA 1/18 1/24 micro brushless motors: Purple Viper 1721 Motor Fat Viper 2204 Motor Note: This ESC is not waterproof. Compatible with most of the receiver and remote combinations that with CH2 Never plug the battery upside down, otherwise the ESC will immediately burn out！ Instruction Manuals Programming Tutorial  If your transmitter does not control the car well, please try these: If you are using a 2S battery, please set the BEC output to 6.0V using the DIP switches. Different settings are required for 2S and 3S batteries! Before powering on, set the transmitter's throttle trim to 0% at neutral. Increase the distance between the transmitter and the car to avoid signal interference. Please use a 2S battery of 750mAh or more, or a 3S battery of 450mAh or more. For optimal performance, we recommend using a 3S Lipo battery. Features: The INJORA MBL32, based on the AM32 firmware, is meticulously tailored for Micro crawlers and is programmable. MBL32 features a built-in BEC with adjustable output: 6V/7.4V Plug-and-Play Convenience: Includes multiple adapter cables for different battery connectors. ESC Specifications: Part Number: MBL32 Max Current: 30A LiPo Cells: 2-3s BEC: Max 3A BEC Output: 6.0V/7.4V (adjustable by DiP switches) Motor Connectors: PH2.0 3Pin Dimensions(L*W*H): 30*22*11mm Weight: 16g Package List: 1 * Micro Brushless ESC 1 * Battery Adapter Cable (Female XT30 to Male TRX-4M) 1 * Battery Adapter Cable (Female XT30 to Male JST-RCY) 1 * Instruction Manual