hgm8110can controller for single automation systems, VFD+RS485+ethernet+GSM+J1939 for SmartGen

HGM8110CAN SmartGen Generator controller, VFD+RS485+ETHERNET+GSM+J1939 DESCRIPTION: Type:Controller Part Number：HGM8110CAN Condition: new，original Manufacturer Warranty: 1 Year Feature: 1. With ARM-based 32-bit SCM, highly integrated hardware, new reliability level. 2. Vacuum fluorescent display (VFD) or LCD display(able to control heating according to the environment temperature), selectable Chinese/English interface which can be chosen at the site, making commissioning convenience for factory personnel. 3. LCD adopts hard screen acrylic material with good wear-resisting and scratch-resisting. 4. Silicone panel and pushbuttons can be used in extreme temperature environment. 5. RS485 communication interface enable “Three remote functions” (remote control, remote measuring and remote communication) according to MODBUS protocol. 6. Ethernet monitoring can be realized via ETHERNET communication interface (need controller with Ethernet interface). 7. Equipped with SMS (Short Message Service) function. When genset is alarming, controller can send short messages via SMS automatically to max. 5 telephone numbers. Besides, generator status can be controlled and checked using SMS. 8. Equipped with CANBUS port and can communicate with J1939 genset. Not only can monitor frequently-used data (such as water temperature, oil pressure, speed, fuel consumption and so on) of ECU machine, but also control starting up, shutdown , raising speed and speed droop via CANBUS port (need controller with CANBUS interface). 9. Suitable for 3-phase 4-wire, 3-phase 3-wire, single phase 2-wire, and 2-phase 3-wire systems with voltage 120/240V and frequency 50/60Hz. 10. Collects and shows 3-phase voltage, current, power parameter and frequency of generator or mains. 11. For Mains, controller has over and under voltage, over and under frequency, loss of phase and phase sequence wrong detection functions; for generator, controller has over and under voltage, over and under frequency, loss of phase, phase sequence wrong, over and reverse power, over current functions. 12. 3 fixed analog sensors (temperature, oil pressure and liquid level). 13. 2 configurable sensors can be set as sensor of temperature, oil pressure or fuel level. 14. Precision measure and display parameters about Engine. 15. Protection: automatic start/stop of the gen-set, ATS(Auto Transfer Switch) control with perfect fault indication and protection function. 16. All output ports are relay-out; 17. Parameter setting: parameters can be modified and stored in internal FLASH memory and cannot be lost even in case of power outage; most of them can be adjusted using front panel of the controller and all of them can be modified using PC via USB, RS485 or ETHERNET ports. 18. More kinds of curves of temperature, oil pressure, fuel level can be used directly and users can define the sensor curves by themselves. 19. Multiple crank disconnect conditions (speed sensor, oil pressure, generator frequency) are optional. 20. Widely power supply range DC(8~35)V, suitable to different starting battery voltage environment; 21. Event log, real-time clock, scheduled start & stop generator (can be set as start genset once a day/week/month whether with load or not). 22. PLC (Programmable Logic Controller) function. Users can use graphical programming to achieve specific functions. 23. Can be used on pumping units and as an indicating instrument (indicate and alarm are enable only, relay is inhibited). 24. With maintenance function. Actions (warning, shutdown or trip and stop) can be set when maintenance time out. 25. All parameters used digital adjustment, instead of conventional analog modulation with normal potentiometer, more reliability and stability; 26. Waterproof security level IP55 due to rubber seal installed between the controller enclosure and panel fascia; 27. Metal fixing clips enable perfect in high temperature environment; 28. Modular design, anti-flaming ABS plastic enclosure, pluggable connection terminals and embedded installation way; compact structure with easy mounting. 29. With accumulative running A、B and accumulative power A、B function, users can eliminate log event and re-accumulating, thus provide convenient for users statistic. Note:1. Please make sure it will fit your machine before purchasing it. If you are not 100% sure this is what you need, please find out your engine model, series number and contact our Customer-service.2. Please double check the part number of your item, matching information is for reference only.If you are unsure of the item, please contact us before buying to avoid unnecessary return, thanks!3. Communication is the best way to solve the problem. If you have any problems after you receive the package, please contact us in time, before opening a return or case. 4.For more information please contact us info@diselmart.com. We will reply you in 24 hours.