220V 50HZ PIR Induction Light Control Ceiling Lamp Body Infrared Switch

Parameter:1.Sensing Mode:PIR sensing + light control2.Rated Voltage:220V 50HZ3.Output Way:controllable silicon4.Load Power:filament lamp 100W; Electricity saving lamp 30W; LED 18W5.Delay:20s (people are moving within the sensing range, the switch will auto delay and keep connecting;if people stay still,switch will stop responsing)6.Sensing Distance:3-6m (high temperature will influence switch sensibility); Sensing Angle:110¡ãFeatures:1.Adaptive to filament, electricity saving lamp2.This lamp is internal equipped with auto body sensor.If poeple come.the lam will power on;if people leave,the lamp will power off3.Inner body auto sensor adopts infrared heat releasing device,and it can accurately capture moving low frequency signal and automatically power on4.When people leave,the lamp will auto dalay power off,convenient and energy saving5.Inner side of the lap is set up with auto ambient brightness detecting circuit.Only when ambient brightness is lower than setting value,the sensor will receive sense and let the lamp power off.And it is energy savingNotice:1.When installing,please disconnect the power to guarantee safety2.Don't apply it to overpower current or voltage3.Don't install it accessible to water4.Detection distance will change according to ambient temperature's difference.In summer,detection distance is short(it is obvious when close to human body's temperature);in winter, detection distance will be far5.Don't install it in lower than -20 or higher than 60 6.Don't expose it to sun7.Don't install it in which there are moving objects8.The first time power on ,there will one minute initiation;during this period,the device will shine,it is normal phenomenon9.In coast zone,thermal flow will trigger the sensor because of ocean current.If installing filament lamp which emits great heat,please keep far away from the sensor(at least 1m) Package Include: 1 x 110~220V PIR Induction Light Control Ceiling Lamp Body Infrared Switch 50HZ