1S 3.7V 2.5A Lithium Batterry Protection Board Polymer BMS PCM PCB Li-ion Module
diytech.cc
Electronics / Circuit Boards & Components

1S 3.7V 2.5A Lithium Batterry Protection Board Polymer BMS PCM PCB Li-ion Module

$0.53
{{option.name}}: {{selected_options[option.position]}}
{{value_obj.value}}
Store Logo

Diytech

View Store

Description:1. Charing Voltage: DC 4.2-5 V DC / CV2. Single Battery Current Consumption: <= 6uA Continuous Current 2.7A Current3. Overload Rated Voltage: 4.2 V +/- 0.025 V4. Delay Delay Overload: 150-500 MS5. Overload Reset Voltage: 4.0 V +/- 0.025 V6. Overdischarging Detection Voltage: 2.75 V +/- 0.1 V7. Overdischarging Detection Delay: 50-150 ms8. Overdischarge Reset Voltage: 2.9 V +/- 0.10 V9. Overcurrent Detection Voltage: 150 +/- 30mv10. Current Overcurrent Current: 4.5 +/- 0.5A11. Overcurrent Detection Delay Time: 5 ms-15 ms12. Overcurrent Restore Type: Automatic RestoreCircuit 13. Short Detection Status: External Short CircuitCircuit 14. Short Time Delay Detection: <= 50us15. Short Circuit Restore State: Automatic Restore16. Internal Resistance: MOSPET <= 40 m ohms17. Operating Temperature Range: -40- + 50 Degrees CelsiusStorage Temperature: -40- + 90 Degrees Celsius19. Size: 28 * 3.8 * 1.2mmFeatures:1. Connect Teminal Battery Charger Adapt High-Voltage Instrument2. Internal 3 Phases detectiton overcurrent circuit (overcurrent 1, overcurrent 2, short circuit of the load)3. MOS tube that can control charge and discharge of the battery4. Wide Operating Temperature Range5. Low Power ConsumptionWelding Point Introduction:1. B +: Connect with positive power2. B-: Connect with negative power3. P +: connect with positive charge / recharge (common port charging / discharge port used)4. P-: connect with negative charge / discharge port (common port charging / discharge port used)Package Included:1*1S 3.7V 2.5A Lithium Batterry Protection Board

Show More Show Less