DMX Core Pico 2 - DMX Re-Mapper

Ever needed to re-map DMX channels in an installation? Maybe you don't have access to the original programming and now you got a new light fixture with a different profile. This controller can hook up on your DMX line and re-map any of the channels. For each output channel you can configure which input channel it should take data from, or if it should be a fixed value. Configuration is stored in the onboard non-volatile flash memory and can be easily updated by connecting the controller to your computer via USB-C. Powered via USB-C, or 7-28 VDC. Built on the DMX Core Pico 2 so you could even replace the firmware with your own, but this listing includes one license for the re-mapper firmware. Both DMX512 ports are isolated using industry best practices. 2x DMX512 ports 3-pin connectors for DMX, same as for the DMXking products 7-28VDC power supply, or power via USB-C Includes USB cable, power and DMX connectors Can be DIN-rail mounted, or surface/wall mounted Typical power consumption 30mA at 12V, less than 1w   Add a pre-built DMX cable to get up and running quickly, or build your own. DMX cables not included. Make sure you sign up to our dedicated mailing list for DMX Core information: Sign up Documentation is here: Documentation We have an intro video available on YouTube. Shipping now!