P3 Gauges Analog DIY (All Models/All Years)

The Analog P3 DIY Gauge allows you to custom install this gauge anywhere in your car for a beautiful OEM+ sleek look! Wiring and cutting may be required, and this Analog version is not Plug & Play (click here for the OBD2 Plug & Play DIY version).  Hard-wires to power and ground (Don't want to hard-wire? purchase our OBD2 power/ground tap harness instead) Display is oversized to give you the ability to trim it down to the size and shape that you want - 5" Long 2.25" tall and .75" deep. *If you decide to modify display, any cutting or modifying is your responsibility. We suggest using a dremel or similar tool for shaping the display. Lexan will crack on edge if using snips so you will need to cut oversized and then file down to the final size for a smooth edge.  3' display ribbon cable allows for easy routing in tight spots. Display is made of aluminium and lexan. All electronics in the display are located directly behind the LEDs and buttons. Any material outside of that ca